Enviar artigo por via de e-mail Macrostructure and Mechanical Properties of Al – Si, Al – Mg – Si, and Al – Mg – Mn Aluminum Alloys Produced by Electric Arc Additive Growth
- Autores: Panchenko O.V.1, Zhabrev L.A.1, Kurushkin D.V.1, Popovich A.A.1
-
Afiliações:
- National Technology Initiative “New Production Technologies”, Center at Peter the Great St. Petersburg Polytechnic University
- Edição: Volume 60, Nº 11-12 (2019)
- Páginas: 749-754
- Seção: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/236497
- DOI: https://doi.org/10.1007/s11041-019-00351-z
- ID: 236497
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The macrostructure and mechanical properties of clad metal produced by electric arc additive growth using wires of aluminum alloys of three alloying systems (Al – Si, Al – Mg – Si, and Al – Mg – Mn) are studied. The distribution of the pores is assessed, the porosity and the microhardness are evaluated. The anisotropy of the mechanical properties determined in some specimens is explained.
Sobre autores
O. Panchenko
National Technology Initiative “New Production Technologies”, Center at Peter the Great St. Petersburg Polytechnic University
Autor responsável pela correspondência
Email: panchenko_ov@spbstu.ru
Rússia, St. Petersburg
L. Zhabrev
National Technology Initiative “New Production Technologies”, Center at Peter the Great St. Petersburg Polytechnic University
Email: panchenko_ov@spbstu.ru
Rússia, St. Petersburg
D. Kurushkin
National Technology Initiative “New Production Technologies”, Center at Peter the Great St. Petersburg Polytechnic University
Email: panchenko_ov@spbstu.ru
Rússia, St. Petersburg
A. Popovich
National Technology Initiative “New Production Technologies”, Center at Peter the Great St. Petersburg Polytechnic University
Email: panchenko_ov@spbstu.ru
Rússia, St. Petersburg
Arquivos suplementares
