Enviar artigo por via de e-mail Resource-Saving Technology for Preparing Nickel Superalloy VZh175 Using Substandard Waste
- Autores: Min P.G.1, Vadeev V.E.1, Kramer V.V.1
-
Afiliações:
- State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
- Edição: Volume 60, Nº 9-10 (2017)
- Páginas: 989-996
- Seção: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/239389
- DOI: https://doi.org/10.1007/s11015-017-0397-9
- ID: 239389
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A resource-saving technology is presented for processing up to 100% waste, including substandard material, of wrought alloy VZh175 for turbine disks. The technology has been developed in the scientific-production complex of VIAM and makes it possible the prepare alloy from waste no worse than that produced from fresh charge materials with respect to alloying content, impurities, structure, and mechanical properties. The cost is lower by 20–30% compared with that of alloy melted by industrial technology using 50% standard waste.
Sobre autores
P. Min
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Autor responsável pela correspondência
Email: viamlab3@mail.ru
Rússia, Moscow
V. Vadeev
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: viamlab3@mail.ru
Rússia, Moscow
V. Kramer
State Research Center of the Russian Federation – All-Russia Research Institute of Aviation Materials (VIAM)
Email: viamlab3@mail.ru
Rússia, Moscow
Arquivos suplementares
