Enviar artigo por via de e-mail Flow stress of EK-181 steel as a function of the strain rate and the strain
- Autores: Kostyukhina A.V.1, Leont’eva-Smirnova M.V.1,2, Izmalkov I.N.2, Fedotov P.V.2, Loshmanov L.P.1
-
Afiliações:
- National Research Nuclear University MEPhI
- Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
- Edição: Volume 2017, Nº 7 (2017)
- Páginas: 576-578
- Seção: Article
- URL: https://journal-vniispk.ru/0036-0295/article/view/171577
- DOI: https://doi.org/10.1134/S0036029517070096
- ID: 171577
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Branch pipes (segments of fuel claddings of a full cross section) and ring specimens of two sizes were subjected to tensile tests. The experimental results are used to plot hardening curves, which are true stress–strain curves. The set of these curves is employed to plot the desired flow surface of EK-181 steel.
Palavras-chave
Sobre autores
A. Kostyukhina
National Research Nuclear University MEPhI
Autor responsável pela correspondência
Email: KostyukhinaN@yandex.ru
Rússia, Moscow
M. Leont’eva-Smirnova
National Research Nuclear University MEPhI; Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Rússia, Moscow; Moscow
I. Izmalkov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Rússia, Moscow
P. Fedotov
Bochvar High-Technology Institute of Inorganic Materials (VNIINM)
Email: KostyukhinaN@yandex.ru
Rússia, Moscow
L. Loshmanov
National Research Nuclear University MEPhI
Email: KostyukhinaN@yandex.ru
Rússia, Moscow
Arquivos suplementares
