Cooling tower irrigator layout with allowances for non-uniformity of the airflow velocity field

Аннотация

This article covers the results of analysis of aerodynamic processes in the cooling tower irrigator and provides the approaches to optimal layout of preformed packing blocks (of the irrigator) developed based on these results. The analysis of the airflow velocity field in the cooling towers shows that the irrigation space can be broken down into the following zones: the peripheral zone of the cooling tower near the airblast windows, the zone near the cooling tower center, and the intermediate zone. Furthermore, the highest level of nonuniformity of the airflow velocity field in cooling towers is in the zone adjoining the tower’s airblast windows. The proposed concept of the cooling tower irrigator’s layout is made with allowances for the airflow velocity field characteristics in the cross-section of the irrigation space of the cooling tower. Based on this concept, we suggest that higher irrigator blocks should be placed in the zone of increased airflow consumption, which provides the possibility to enhance the hydraulic resistance and, respectively, decrease the gas flow velocity as well as to boost the efficiency of chilling the circulating water in the cooling tower. For this purpose, additional irrigator blocks can be of the same design as the main irrigator. As an option, it is possible to use blocks of the geometry and design other than the main irrigator block in the cooling tower.