Enviar artigo por via de e-mail Investigation of deformation behavior and fracture of ceramic coatings by the acoustic emission method
- Autores: Klyatskina E.A.1, Salvador M.D.1, Segovia E.F.1, Carpio P.1, Borrell A.1, Snachez E.2, Stolyarov V.V.3,4
-
Afiliações:
- Materials Technological Institute
- Institute of Ceramic Technology
- Mechanical Engineering Research Institute
- National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
- Edição: Volume 46, Nº 2 (2017)
- Páginas: 174-180
- Seção: New Technologies in Manufacturing
- URL: https://journal-vniispk.ru/1052-6188/article/view/193297
- DOI: https://doi.org/10.3103/S1052618817020078
- ID: 193297
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The use of protective coatings on components of machines and mechanisms provides the greatest economic benefit at the lowest additional cost. Plasma spraying is one of the most productive, technologically advanced, and efficient methods of producing these coatings. The results of investigations of structures, mechanical properties, and fracture surfaces of ceramic wear resistant coatings produced by plasma spraying have been presented.
Sobre autores
E. Klyatskina
Materials Technological Institute
Autor responsável pela correspondência
Email: klyatskinal@inbox.ru
Espanha, Valencia
M. Salvador
Materials Technological Institute
Email: vlstol@mail.ru
Espanha, Valencia
E. Segovia
Materials Technological Institute
Email: vlstol@mail.ru
Espanha, Valencia
P. Carpio
Materials Technological Institute
Email: vlstol@mail.ru
Espanha, Valencia
A. Borrell
Materials Technological Institute
Email: vlstol@mail.ru
Espanha, Valencia
E. Snachez
Institute of Ceramic Technology
Email: vlstol@mail.ru
Espanha, Castelló de la Plana
V. Stolyarov
Mechanical Engineering Research Institute; National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)
Autor responsável pela correspondência
Email: vlstol@mail.ru
Rússia, Moscow; Moscow
Arquivos suplementares
