Measurement of the Kinematic Viscosity of Molar Melt 73LiF–27BeF2 and Influence of Cerium Trifluoride and Zirconium Tetrafluoride Additives on Viscosity


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

In validating the concept of a molten-salt nuclear reactor for incinerating transuranium elements from spent nuclear fuel of light-water reactors, experimental data on the kinematic viscosity of melt with the molar composition 73LiF–27BeF2 were obtained in the range 882–1172 K. The influence of cerium trichloride and zirconium trifluoride as additives on the viscosity was investigated. It is shown that for all compositions the obtained viscosity is described by an exponential function of the reciprocal of absolute temperature. The parameters of this function are determined for each composition. It was found that the addition of cerium trifluoride in the amount 1 mol.% to the initial composition lowers viscosity at low temperature. Subsequent addition of zirconium tetrafluoride appreciably lowers the liquidus temperature.

作者简介

A.V. Merzlyakov

National Research Center Kurchatov Institute

Email: j-atomicenergy@yandex.ru
俄罗斯联邦, Moscow

V. Ignat’ev

National Research Center Kurchatov Institute

Email: j-atomicenergy@yandex.ru
俄罗斯联邦, Moscow

S. Abalin

National Research Center Kurchatov Institute

Email: j-atomicenergy@yandex.ru
俄罗斯联邦, Moscow

补充文件

附件文件
动作
1. JATS XML

版权所有 © Springer Science+Business Media, LLC, part of Springer Nature, 2018