| 期 |
标题 |
文件 |
| 卷 39, 编号 3 (2017) |
Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC–Co tools |
(Eng)
|
|
Hoier P., Klement U., Tamil Alagan N., Beno T., Wretland A.
|
| 卷 39, 编号 3 (2017) |
Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process |
(Eng)
|
|
Matyukha P., Poltavets V.
|
| 卷 39, 编号 2 (2017) |
Formation of flat surfaces of optoelectronic components in diamond polishing |
(Eng)
|
|
Filatov Y., Sidorko V., Kovalev S., Vetrov A.
|
| 卷 39, 编号 1 (2017) |
The correlation model of acoustic emission in fine diamond turning |
(Eng)
|
|
Devin L., Rychev S.
|
| 卷 39, 编号 1 (2017) |
Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases |
(Eng)
|
|
Jaworska L., Zebala W., Rutkowski P., Cygan S., Klimczyk P., Putyra P.
|
| 卷 38, 编号 6 (2016) |
Oxidation or oxide materials in the machining zone in superabrasive grinding—A factor of influence on the grinding performance |
(Eng)
|
|
Lavrinenko V., Solod V.
|
| 卷 38, 编号 5 (2016) |
Cutting of polycrystalline superhard materials by jet methods |
(Eng)
|
|
Salenko A., Shchetinin V., Gabuzyan G., Nikitin V., Novikov N., Klimenko S.
|
| 卷 38, 编号 5 (2016) |
The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam |
(Eng)
|
|
Nguyen T.
|
| 卷 38, 编号 3 (2016) |
Polished surface roughness of optoelectronic components made of monocrystalline materials |
(Eng)
|
|
Filatov O., Sidorko V., Kovalev S., Filatov Y., Vetrov A.
|
| 卷 38, 编号 2 (2016) |
Material removal rate in polishing anisotropic monocrystalline materials for optoelectronics |
(Eng)
|
|
Filatov O., Sidorko V., Kovalev S., Filatov Y., Vetrov A.
|
| 卷 38, 编号 2 (2016) |
On chip flow direction in oblique free cutting of ductile metals |
(Eng)
|
|
Vinogradov A.
|
| 卷 38, 编号 1 (2016) |
Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding |
(Eng)
|
|
Lavrinenko V.
|
| 卷 38, 编号 1 (2016) |
Grain shape as a factor governing the parameters of diamond electroplated coating of dressing tools. Part 2. Actual grain–graphite form contact area and related characteristics as input data for calculating the conditions of diamond electroplated coating application by electroforming method |
(Eng)
|
|
Sheiko M., Skok V., Pasichnyi O.
|
| 卷 38, 编号 1 (2016) |
An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals |
(Eng)
|
|
Devin L., Rychev S.
|
| 26 - 39 的 39 信息 |
<< < 1 2
|
