Email this article Laser Cladding of Copper Alloys on Steel
- Authors: Biryukov V.P.1, Bazlova T.A.2
-
Affiliations:
- Blagonravov Mechanical Engineering Research Institute
- National University of Science and Technology MISiS
- Issue: Vol 82, No 11 (2019)
- Pages: 1450-1453
- Section: Promising Construction Materials
- URL: https://journal-vniispk.ru/1063-7788/article/view/195845
- DOI: https://doi.org/10.1134/S1063778819110024
- ID: 195845
Cite item
Open Access
Access granted
Subscription Access
Abstract
The paper discusses the process of welding copper-based powder on samples of steel 40 Kh by radiation of a continuous CO2 laser. It is shown that the friction coefficients are 0.014–0.021 for samples cladded by a scanning beam, which is lower by a factor of two than for samples of cast bronze. The effect of transverse beam oscillations on the quality and performance of the cladding process is studied. It is shown that, for a beam scanning frequency of 220 Hz, the cladding performance increases by a factor of 1.5.
About the authors
V. P. Biryukov
Blagonravov Mechanical Engineering Research Institute
Author for correspondence.
Email: laser-52@yandex.ru
Russian Federation, Moscow, 101990
T. A. Bazlova
National University of Science and Technology MISiS
Email: laser-52@yandex.ru
Russian Federation, Moscow, 119049
Supplementary files
