Email this article Free SHS-Compression Method for Producing Large-Sized Plates from Ceramic Materials
- Authors: Stolin A.M.1, Bazhin P.M.1, Konstantinov A.S.1, Stolin P.A.1, Prokopets A.D.1,2, Kovalev I.D.1
-
Affiliations:
- Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences
- Federal State Budgetary Educational Institution of Higher Education, “Altai State Technical University named after I. I. Polzunov”
- Issue: Vol 60, No 3 (2019)
- Pages: 261-263
- Section: Article
- URL: https://journal-vniispk.ru/1083-4877/article/view/249302
- DOI: https://doi.org/10.1007/s11148-019-00348-4
- ID: 249302
Cite item
Open Access
Access granted
Subscription Access
Abstract
A free SHS-compression method was used to produce large-sized plates measuring 120 × 80 × 8 and 80 × 40 × 8 mm from a titanium boride-based material using 120 kN press equipment. The structural features as well as physical and mechanical properties of the obtained materials were studied. The samples were annealed in an oxidizing atmosphere at 1100°C for 10 hours.
About the authors
A. M. Stolin
Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences
Author for correspondence.
Email: Provotorov@vulkantm.com
Russian Federation, Chernogolovka
P. M. Bazhin
Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences
Email: Provotorov@vulkantm.com
Russian Federation, Chernogolovka
A. S. Konstantinov
Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences
Email: Provotorov@vulkantm.com
Russian Federation, Chernogolovka
P. A. Stolin
Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences
Email: Provotorov@vulkantm.com
Russian Federation, Chernogolovka
A. D. Prokopets
Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences; Federal State Budgetary Educational Institution of Higher Education, “Altai State Technical University named after I. I. Polzunov”
Email: Provotorov@vulkantm.com
Russian Federation, Chernogolovka; Barnaul
I. D. Kovalev
Federal State Budgetary Research Institution “Institute of Structural Macrokinetics and Materials Science named after Academician A. G. Merzhanov”, Russian Academy of Sciences
Email: Provotorov@vulkantm.com
Russian Federation, Chernogolovka
Supplementary files
