Email this article Research of strength parameters and dynamic characteristics of rotor parts of a promising small sized GTE
- Authors: Evdokimov D.V.1,2, Filinov E.P.1, Skuratov D.L.1, Ostapyuk Y.A.1
-
Affiliations:
- Samara National Research University
- JSC «Aviaagregat»
- Issue: Vol 10, No 1 (2024): 6.05.2024
- Pages: 29-39
- Section: Articles
- URL: https://journal-vniispk.ru/2409-4579/article/view/312242
- DOI: https://doi.org/10.18287/2409-4579-2024-10-1-29-39
- ID: 312242
Cite item
Full Text
Abstract
The presented work demonstrates a study devoted to assessing the strength characteristics of the rotor elements of a promising small-sized gas turbine engine. The main feature is that the analysis of the stress-strain state of the engine rotor is carried out taking into account vibrations and resonant frequencies. In turn, the assessment of the dynamic characteristics of the rotor elements was carried out taking into account the conditions of their mutual contact. The research materials presented in this article will serve for further iterations of engine design.
About the authors
Dmitriy V. Evdokimov
Samara National Research University; JSC «Aviaagregat»
Author for correspondence.
Email: dmitry.evd.ssau@gmail.com
Candidate of Science (Engineering), Associate Professor of the Department of Engine Production Technologies, Associate Professor of Strength of Materials Department, Senior Researcher of Research laboratory NIL-207; Leading Engineer of JSC «Aviaagregat»
Russian Federation, SamaraEvgeniy P. Filinov
Samara National Research University
Email: filinov@ssau.ru
Candidate of Science (Engineering), Associate Professor of the Department of Theory of Aircraft Engines named after V.P. Lukachev, Senior Researcher of Research laboratory NIL-207, Senior Researcher of «Advanced Aerospace Engineering School», с.н.с. KB-203 (Engine Engineering Design Bureau of Samara University)
Russian Federation, SamaraDmitriy L. Skuratov
Samara National Research University
Email: dmitry.evd.ssau@gmail.com
Doctor of Science (Engineering), Professor
Russian Federation, SamaraYaroslav A. Ostapyuk
Samara National Research University
Email: dmitry.evd.ssau@gmail.com
Researcher of NIL-207, Senior Lecturer of the Department of Aircraft Engine Theory named after V. P. Lukachev, Researcher of KB-203
Russian Federation, SamaraReferences
- Akimov, V. M. (1981), Fundamentals of reliability of gas turbine engines [Osnovy nadezhnosti gazoturbinnykh dvigateley : uchebnik dlya mashinostroit. spets. vuzov], Mashinostroenie [Mechanical Engineering], Moscow, 207 p. (in Russian).
- Antonyuk, V. E. (2005), "Dynamic stabilization of disk-type parts", Strengthening technologies and coatings, no. 7, pp. 24-29. (in Russian).
- Antonyuk, V. E. (2005), "Technological possibilities for increasing the accuracy of manufacturing disks and shafts", Mechanical engineering technology, no. 6, pp. 43-48. (in Russian).
- Bratukhin, A. G., Yazov, G. K., Karasev, B. E., Eliseev, Yu. S., Krymov, V. V. and Nezhurin, I. P. (1997), Modern technologies in the production of gas turbine engines, Mashinostroenie [Mechanical Engineering], Moscow, 416 p. (in Russian).
- Shevchenko, V. P., Vlasov, O. I. and Kairov, V. A. (2013), "Experimental study of natural vibrations of structurally inhomogeneous cylindrical shells", News of NTUU "KPI". Machine-building series, no. 2 (68), pp. 122-127. (in Russian).
- Zarutsky, V. A. (2001), "On complex experimental studies of stability and vibrations of structurally inhomogeneous shells", Appl. Mechanics, vol.37, no. 8, pp. 38-67. (in Russian)
- Kay, G. and Lesuer, D. (2003), Failure Modeling of Titanium 6Al-4V and Aluminum 2024-T3 With the Johnson-Cook Material Model: research report (conclusion), Lawrence Livermore National Laboratory, National Technical Information Service (NTIS), Virginia, 17 p.
- Dorogoy, A and Rittel, D. (2005), "Numerical Validation of the Shear Compression Specimen. Part I: Quasi-static Large Strain Testing", Experimental mechanics, vol. 45, no. 2, pp. 167-177.
- Dorogoy, A and Rittel, D. (2005), "Numerical Validation of the Shear Compression Specimen. Part II: Dynamic Large Strain Testing", Experimental mechanics, vol. 45, no. 2. pp. 178-185.
- Baturin, O.V., Lyu, Ch., Sun, P. and Han, K. (2022), "Educational Optimization Software for Axial Compressor Flow Path Design", 2022 IEEE 5th International Conference on Electronics Technology (ICET 2022), pp. 381-385.
- Ananyev, I. V. and Timofeev, P. G. (1965), Vibrations of elastic systems in aircraft structures and their damping, Mashinostroenie [Mechanical Engineering], Moscow, 526 p. (in Russian).
Supplementary files
