Email this article Mechanisms of formation of nanostructured electrolytic coatings Fe-Ni, Co-Mn, Ni-Cr with functional properties
- Authors: Zhikhareva I.G.1, Schmidt V.V.1,2, Denisenko D.V.1,3, Shchipanov V.P.1, Fedorov A.D.1, Neustroev A.I.1
-
Affiliations:
- Industrial University of Tyumen
- Tyumen Higher Military Engineer Command School named after A. I. Proshlyakov
- PJSC "Tyumen Design and Research Institute of Oil and Gas Industry named after V. I. Muravlenko"
- Issue: No 3 (2023)
- Pages: 96-103
- Section: Mechanical engineering
- URL: https://journal-vniispk.ru/2782-232X/article/view/317528
- DOI: https://doi.org/10.31660/2782-232X-2023-3-96-103
- ID: 317528
Cite item
Full Text
Abstract
The evolution of modern industry is impossible without the development of new materials and technologies. Nanostructured coatings, in particular electrolytic coatings, are among the most demanded in mechanical engineering. The purpose of this work was to study the different mechanisms of obtaining Fe-Ni, Co- Mn, Ni-Cr galvanic alloys and their relationship with the specified universal physical and mechanical properties. Fe-Ni alloy is characterized by high microhardness and corrosion resistance in sea water, low cold brittleness; Co-Mn – by a specified phase composition (α-Co >> α-Mn, amorphous and metastable phase Co(OH)2); Ni-Cr – by high coating microhardness, specified phase composition. The main methods of production: high-frequency alternating current for Fe-Ni and Co-Mn alloys; introduction of a special additive (carbamide or H-acid) for Ni-Cr alloy. The main mechanisms are: Fe-Ni due to phase transition α-Fe → ε-Fe; Co-Mn by means of high-frequency alternating current and carbamide addition, providing a specified phase composition; Ni-Cr by means of stationary method of addition of H-acid (high-chromium alloy of 68 mass percent of Cr) and carbamide (low-chromium alloy of 25 mass percent of Cr). Recommended uses for electroplating: Fe-Ni – for protection of oil and gas production equipment in the Arctic; Co- Mn – in modulation systems and as a nanocatalyst in the Fischer-Tropsch synthesis reaction; Ni-Cr – for corrosion-resistant protective coatings in petrochemistry and for resistive elements.
About the authors
I. G. Zhikhareva
Industrial University of Tyumen
Email: zhiharevaig@tyuiu.ru
V. V. Schmidt
Industrial University of Tyumen; Tyumen Higher Military Engineer Command School named after A. I. Proshlyakov
Email: shmidt_vadim@mail.ru
D. V. Denisenko
Industrial University of Tyumen; PJSC "Tyumen Design and Research Institute of Oil and Gas Industry named after V. I. Muravlenko"
Email: ardiasardias@gmail.com
V. P. Shchipanov
Industrial University of Tyumen
Email: schipanovvp@tyuiu.ru
A. D. Fedorov
Industrial University of Tyumen
A. I. Neustroev
Industrial University of Tyumen
References
Sergeev, G. B. Nanochemistry of metals / G. B. Sergeev. – doi: 10.1070/RC2001v070n10ABEH000671. – Текст : непосредственный // Russian Chemical Reviews. – 2001. – Vol. 70, No 10. – P. 809–825. Gusev, A. I. Nanocrystalline materials / A. I. Gusev, A. A. Rempel. – Chippenham : Cambridge International Science Publishing, 2004. – 351 p. – Текст : непосредственный. Crystalline and amorphous electroless Co-W-P coatings / S. Armyanov, E. Valova, A. Franquet. – doi: 10.1149/1.1990124 // Journal of the Electrochemical Society. – 2005. – Vol. 152, № 9. – P. 612–619. Electroless deposition of Ni–Sn–P and Ni–Sn–Cu–P coatings / J. Georgieva, S. Kawashima, S. Armyanov. – doi: 10.1149/1.2050467. – Текст : непосредственный // Journal of The Electrochemical Society. – 2005. – Vol. 152, No 11. – P. 783. Воздвиженский, В. М. Классификация легирующих элементов и расчет количества γ‘-фазы в жаропрочных никелевых сплавах / В. М. Воздвиженский, А. А. Шатульский, М. А. Шаповалова. – Текст : непосредственный // Заготовительные производства в машиностроении. – 2007. – № 8. – С. 44–49. Korotaev, A. D. Structural-phase state, elastic stress, and functional properties of nanocomposite coatings based on amorphous carbon / A. D. Korotaev, I. Y. Litovchenko, S. V. Ovchinnikov. – doi: 10.1134/S1029959919060055. – Текст : непосредственный // Physical Mesomechanics. – 2019. – Vol. 22, No 6. – P. 488–495. Inhibition and nickel electrocrystallization / J. Amblard, I. Epelboin, M. Froment, G. Maurin. – doi: 10.1007/BF00616093. – Текст : непосредственный // Journal of Applied Electrochemistry. – 1979. – No 9. – С. 233–242. Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys / C. C. Koch, K. M. Youssef, R. O. Scattergood, K. L. Murty. – doi: 10.1002/adem.200500094. – Текст : непо- средственный // Advanced Engineering Materials. – 2005. – Vol. 7, No 9. – P. 787–794. Zhikhareva, I. G. The role of nanostructure forming mechanism in the production of universal functional coatings with Fe-Ni, Co-Mn, Ni-Cr alloys / I. G. Zhikhareva, V. V. Schmidt, D. V. Denisenko. – doi: 10.1088/1757-899X/971/3/032002. – Текст : непосредственный // IOP Conference Series: Materials Science and Engineering, September, 07–11. – Sevastopol, 2020. – P. 032002. Schmidt, V. V. Hardening of coatings with Ni-Co-Cr alloy dye to nanostructure / V. V. Schmidt, D. V. Denisenko, I. G. Zhikhareva. – doi: 10.1088/1742-6596/1431/1/012018 // Journal of Physics: Conference Series: VIII International Conference "Deformation and Fracture of Materials and Nanomaterials", November, 19–22. – Vol. 1431. – Moscow : Institute of Physics Publishing, 2020. – P. 012018. Zhikhareva, I. G. Development of corrosion-protective coatings with a Fe-Ni nanostructured alloy, designed to work in the Arctic / I. G. Zhikhareva, D. V. Denisenko, V. V. Schmidt. – doi: 10.1063/1.5135163. – Текст : непосредственный // AIP Conference Proceedings: Proceedings of the 13th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, December, 09–13. – Vol. 2176. – Ekaterinburg : American Institute of Physics, 2019. – P. 040014.
Supplementary files
