Study of the possibilities of thermal performance enhancement of flat plate solar water collectors by using of nanofluids as heat transfer fluid
- Authors: Akhatov J.S.1, Mirzaev S.Z.2, Halimov A.S.1, Telyaev S.S.2, Juraev E.T.1
-
Affiliations:
- Physical-Technical Institute, Scientific Association “Physics-Sun,”
- Institute of Ion-Plasma and Laser Technologies
- Issue: Vol 53, No 3 (2017)
- Pages: 250-257
- Section: Solar Power Plants and Their Application
- URL: https://journal-vniispk.ru/0003-701X/article/view/149321
- DOI: https://doi.org/10.3103/S0003701X17030033
- ID: 149321
Cite item
Abstract
The current work represents the simulation results of the thermal performances of flat-plate solar collector with heat transfer fluid–nanofluid (SiO2 + water with 5% concentration) which is obtained experimentally [1]. The dependence of the outlet temperature and gained useful energy of heat transfer fluid (nanofluid) on the flow rates (10, 15 and 20 L/h) at different ranges of incident solar radiation (500–1000 W/m2) was obtained.
About the authors
J. S. Akhatov
Physical-Technical Institute, Scientific Association “Physics-Sun,”
Author for correspondence.
Email: jahatov@uzsci.net
Uzbekistan, Tashkent
S. Z. Mirzaev
Institute of Ion-Plasma and Laser Technologies
Email: jahatov@uzsci.net
Uzbekistan, Tashkent
A. S. Halimov
Physical-Technical Institute, Scientific Association “Physics-Sun,”
Email: jahatov@uzsci.net
Uzbekistan, Tashkent
S. S. Telyaev
Institute of Ion-Plasma and Laser Technologies
Email: jahatov@uzsci.net
Uzbekistan, Tashkent
E. T. Juraev
Physical-Technical Institute, Scientific Association “Physics-Sun,”
Email: jahatov@uzsci.net
Uzbekistan, Tashkent
Supplementary files
