Email this article Thermophysical Validation of the Technology of Asphalt-Resin-Paraffin Deposit Removal from Well Casings in Continuous High-Viscosity Oil Production Conditions
- Authors: Dmitriev M.S.1, Ponomarenko A.G.1, Klachkov A.P.1
-
Affiliations:
- National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
- Issue: Vol 55, No 7-8 (2019)
- Pages: 627-631
- Section: Article
- URL: https://journal-vniispk.ru/0009-2355/article/view/236652
- DOI: https://doi.org/10.1007/s10556-019-00671-0
- ID: 236652
Cite item
Open Access
Access granted
Subscription Access
Abstract
The results of simulation of a system for removing asphalt-resin-paraffin deposits from casing of well with high-viscosity oil, based on local noncontact induction heating, are presented. It is shown that gradual removal of deposit fragments by melting them at the point of adhesion bonding with the casing is possible with a heating power of 3 kW and an inductor moving speed of 2–3 cm/min.
About the authors
M. S. Dmitriev
National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
Email: AGPonomarenko@mephi.ru
Russian Federation, Moscow
A. G. Ponomarenko
National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
Author for correspondence.
Email: AGPonomarenko@mephi.ru
Russian Federation, Moscow
A. P. Klachkov
National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
Email: AGPonomarenko@mephi.ru
Russian Federation, Moscow
Supplementary files
