Email this article Influence of Cellulose-Hydrate-Fiber Modification Parameters on Their Properties
- Authors: Gerasimova V.M.1, Zubova N.G.2, Ustinova T.P.1
-
Affiliations:
- Engels Technological Institute (Branch), Yu. A. Gagarin SSTU
- Balakovo Engineering-Technological Institut (Branch), National Research Nuclear University (MIFI)
- Issue: Vol 48, No 1 (2016)
- Pages: 50-52
- Section: Article
- URL: https://journal-vniispk.ru/0015-0541/article/view/234430
- DOI: https://doi.org/10.1007/s10692-016-9736-z
- ID: 234430
Cite item
Open Access
Access granted
Subscription Access
Abstract
The optimum modification parameters for cellulose-hydrate fibers finished with solutions of AGM-9 and Duron OS 3151 preparations were determined. The properties of the modified cellulose-hydrate fibers were studied. The adhesive properties of the modified fibers were evaluated. It was found that modification helped to increase the strength and adhesive characteristics of the fibrous filler, which could be recommended for preparing an epoxide composite.
Keywords
About the authors
V. M. Gerasimova
Engels Technological Institute (Branch), Yu. A. Gagarin SSTU
Author for correspondence.
Email: gerasimova.victoria@yandex.ru
Russian Federation, Saratov
N. G. Zubova
Balakovo Engineering-Technological Institut (Branch), National Research Nuclear University (MIFI)
Email: gerasimova.victoria@yandex.ru
Russian Federation, Moscow
T. P. Ustinova
Engels Technological Institute (Branch), Yu. A. Gagarin SSTU
Email: gerasimova.victoria@yandex.ru
Russian Federation, Saratov
Supplementary files
