Open Access Open Access  Restricted Access Access granted  Restricted Access Subscription Access

Vol 51, No 4 (2017)

Article

Age and tectonic position of the Stanovoi metamorphic complex in the eastern part of the Central Asian Foldbelt

Velikoslavinskii S.D., Kotov A.B., Kovach V.P., Tolmacheva E.V., Sorokin A.A., Sal’nikova E.B., Larin A.M., Zagornaya N.Y., Wang K.L., Chung S.

Abstract

Based on the results of Sm–Nd isotopic geochemical and U–Th–Pb geochronological LA–ICP–MS studies, it has been established that the formation of metamorphic rock protoliths of the Stanovoi Complex in the western Dzhugdzhur–Stanovoi Superterrane of the Central Asian Foldbelt took place over the following time spans: 2750–2860 Ma (Ilikan Group of the Ilikan Zone), 1890–1910 Ma (Bryanta Group of the Bryanta Zone), and ~2.0 Ga (Kupuri and Zeya groups of the Kupuri and Zeya zones, respectively). It has been shown that the western part of the Dzhugdzhur–Stanovoi Superterrane was formed ~1.9 Ga ago, as a result of collision of the Neoarchean Ilikan Terrane, the Paleoproterozoic island arc, and the Paleoproterozoic Kupuri–Zeya Terrane. The data make it possible to consider the Kurul’ta, and Zverevo blocks of the Stanovoi Structural Suture and the Ilikan Terrane of the Dzhugdzhur–Stanovoi Superterrane of the Central Asian Foldbelt as constituents of a common terrane.

Geotectonics. 2017;51(4):341-352
pages 341-352 views

Crimea–Kopet Dagh zone of concentrated orogenic deformations as a transregional late collisional right-lateral strike-slip fault

Patina I.S., Leonov Y.G., Volozh Y.A., Kopp M.L., Antipov M.P.

Abstract

It is shown that the Crimea, Caucasus, and Kopet Dagh fold systems make up a single whole unified by a lithospheric strike-slip fault zone of concentrated dislocations. The strike-slip fault that dissects the sedimentary cover and consolidated crust is rooted in subcrustal layers of the mantle. The notions about strike-slip dislocations in the structure of the Crimea–Kopet Dagh System are considered. Comparative analysis of structure, age, and amplitude of strike-slip fault segments is carried out. The effect of strike-slip faulting on the deep-seated and near-surface structure of the Earth’s crust is considered. Based on estimation of strike-slip offsets, the paleogeography of Paleogene basins is refined; their initial contours, which have been disturbed and fragmented by slipping motion strike-slip displacement, have been reconstructed.

Geotectonics. 2017;51(4):353-365
pages 353-365 views

Fold deformations of the paleozoic basement roof in the Chunkurchak Trough, Kyrgyz Ala-Too Range

Przhiyalgovskii E.S., Lavrushina E.V.

Abstract

A structural–geological study has been performed on the northern slope of the Kyrgyz Ala-Too Range. Deformations of the peneplaned Paleozoic basement surface, structures of granite disintegration, and morphostructural manifestation of Late Cenozoic tectonic movements have been investigated. Based on the location of pre-Paleocene peneplain remnants with the retained weathering mantle partly overlapped by Paleocene–Miocene sedimentary complexes, we have reconstructed the morphology of the folded surface of the Chunkurchak Trough separated from the Chu Basin at the early Miocene. The dome–fold forms, the morphology and arrangement of which are controlled by disintegration of the basement, have been described for the basement surface. It has been established that granites are broken by systems of steeply dipping, fanshaped, and gently dipping faults and fractures. Variously oriented insignificant offsets along slickensides, as well as displacements deduced from the geometry of fracture intersections, are a result of volumetric cataclastic flow of rocks. The tectonic mobility of disintegrated granites, which are abundant in the Paleozoic–Precambrian basement, explains the complexity and scale of tectonic processes initiated by Cenozoic activation. In paleotectonic reconstructions, which take into consideration tectonic flow and the redistribution of basement masses, the estimates of Cenozoic relative rapprochement of the Chu Basin and the Kyrgyz Ala-Too Range decrease substantially to 4–6 km.

Geotectonics. 2017;51(4):366-382
pages 366-382 views

Geological and geodynamic reconstruction of the East Barents megabasin from analysis of the 4-AR regional seismic profile

Startseva K.F., Nikishin A.M., Malyshev N.A., Nikishin V.A., Valyushcheva A.A.

Abstract

The article considers problems related to the geological structure and geodynamic history of sedimentary basins of the Barents Sea. We analyze new seismic survey data obtained in 2005–2016 to refine the geological structure model for the study area and to render it in more detail. Based on the data of geological surveys in adjacent land (Novaya Zemlya, Franz Josef Land, and Kolguev Island), drilling, and seismic survey, we identified the following geodynamic stages of formation of the East Barents megabasin: Late Devonian rifting, the onset of postrift sinking and formation of the deep basin in Carboniferous–Permian, unique (in terms of extent) and very rapid sedimentation in the Early Triassic, continued thermal sinking with episodes of inversion vertical movements in the Middle Triassic–Early Cretaceous, folded pressure deformations that formed gently sloping anticlines in the Late Cretaceous–Cenozoic, and glacial erosion in the Quaternary. We performed paleoreconstructions for key episodes in evolution of the East Barents megabasin based on the 4-AR regional profile. From the geometric modeling results, we estimated the value of total crustal extension caused by Late Devonian rifting for the existing crustal model.

Geotectonics. 2017;51(4):383-397
pages 383-397 views

Parameters of thermochemical plumes responsible for the formation of batholiths: Results of experimental simulation

Kirdyashkin A.A., Kirdyashkin A.G., Gurov V.V.

Abstract

Based on laboratory and theoretical modeling results, we present the thermal and hydrodynamical structure of the plume conduit during plume ascent and eruption on the Earth’s surface. The modeling results show that a mushroom-shaped plume head forms after melt eruption on the surface for 1.9 < Ka < 10. Such plumes can be responsible for the formation of large intrusive bodies, including batholiths. The results of laboratory modeling of plumes with mushroom-shaped heads are presented for Ka = 8.7 for a constant viscosity and uniform melt composition. Images of flow patterns are obtained, as well as flow velocity profiles in the melt of the conduit and the head of the model plume. Based on the laboratory modeling data, we present a scheme of a thermochemical plume with a mushroom-shaped head responsible for the formation of a large intrusive body (batholith). After plume eruption to the surface, melting occurs along the base of the massif above the plume head, resulting in a mushroom-shaped plume head. A possible mechanism for the formation of localized surface manifestations of batholiths is presented. The parameters of some plumes with mushroom-shaped heads (plumes of the Altay-Sayan and Barguzin-Vitim large-igneous provinces, and Khangai and Khentei plumes) are estimated using geological data, including age intervals and volumes of magma melts.

Geotectonics. 2017;51(4):398-411
pages 398-411 views

Miocene dislocations during the formation of the Sea of Japan basin: Case study of Tsushima Island

Golozubov V.V., Kasatkin S.A., Yokoyama K., Tsutsumi Y., Kiyokawa S.

Abstract

Lower Miocene rocks of the Taishu Group accumulated in the Tsushima pull-apart graben, which downwarped and was filled with sediments at a particularly high rate (about 2700 m/Ma), in the background of northeastern regional shortening. A considerable part of the sedimentary prism is composed of material supplied by landslide blocks from the shallow shelf. Folding and penetration of granite intrusions on Tsushima Island occurred ca. 15 Ma ago, simultaneously with the main phase of opening of the Sea of Japan, in the field of different, northwestern shortening, which had a local character and was related to clockwise rotation of the Southwestern Japan block. These rotations in turn could have been the result of an intensive rifting episode in the Central and Honshu basins of the Sea of Japan, which are located north of Tsushima Island.

Geotectonics. 2017;51(4):412-427
pages 412-427 views

Active faults pattern and interplay in the Azerbaijan region (NW Iran)

Faridi M., Burg J., Nazari H., Talebian M., Ghorashi M.

Abstract

Northwest Iran is dominated by two main sets of active strike slip faults that accommodate oblique convergence between the Arabian and Iranian Plates. The best known are the right-lateral North-Tabriz, Qoshadagh, Maragheh and Zagros (Main Recent) strike slip Faults. This work reports that these dominant NW–SE to E–W striking faults are conjugate to smaller, NNE–SSW striking, left-lateral faults with minor dip slip component. All of these active faults displace Precambrian rock units, which suggests that they root in the crystalline basement of the NW Iranian microcontinent. Coulomb stress variance during co-seismic rupture along one of these faults may cause reactivation of the other faults. The minor set of left-lateral fault is therefore important to introduce in seismic risk assessment.

Geotectonics. 2017;51(4):428-437
pages 428-437 views

Strain geometry, microstructure and metamorphism in the dextral transpressional Mubarak Shear Belt, Central Eastern Desert, Egypt

Abd El-Wahed M.A., Thabet I.A.

Abstract

Mubarak shear belt provides an opportunity to investigate quantitative finite strain (Rs), proportions of pure shear and simple shear components, sense of shear indicators, subhorizontal to steeply plunging mineral lineations, in a dextral transpressional zone. The structural style of the Mubarak shear belt is consistent with dextral transpression within the Central Eastern Desert where dextral and reverse shear have developed simultaneously with the regional foliation. The high strain zone of the Mubarak shear belt is characterized by steeply dipping foliation with sub-horizontal stretching lineation (simple shear) surrounded by thrust imbrications with slightly plunging stretching lineations. Strain estimates from the Mubarak shear belt are used to determine how pure and simple shear components of deformation are partitioned. The axial ratios in XZ sections range from 1.16 to 2.33 with the maximum stretch, SX, ranges from 1.06 to 1.48. The minimum stretch, SZ, ranges from 0.65 to 0.92 indicating a moderate variation in vertical shortening. Volcaniclastic metasediments and metagabbros were subjected to prograde low-grade regional metamorphism in the range of greenschist to lower amphibolite facies (450–650°C at 2–4 kbar). Medium pressure (6–8 kbar at 530°C) was estimated from the high strain zone within the dextral strike-slip shear zones. Retrograde metamorphism occurred at a temperature range of 250–280°C. There is a trend towards decreasing the ratio of 100Mg/(Mg + Fetot + Mn) away from the high strain zone of the Mubarak shear belt. Integrated strain and temperature estimates indicate that the simple shear (non-coaxial) components of deformation played a significant role in formation and exhumation of the Mubarak shear belt during the accumulation of finite strain and consequently during progressive transpression and thrusting.

Geotectonics. 2017;51(4):438-462
pages 438-462 views