Output voltage adjustment of a pulsed high-voltage nanosecond generator with inductive energy storage and a solid-state switching system

S. R. Korzhenevskiy; A. A. Komarskiy; A. S. Chepusov; V. A. Bessonova; V. N. Titov

doi:10.1134/S0020441217010213

Output voltage adjustment of a pulsed high-voltage nanosecond generator with inductive energy storage and a solid-state switching system

Authors: Korzhenevskiy S.R.¹, Komarskiy A.A.¹, Chepusov A.S.¹, Bessonova V.A.¹, Titov V.N.¹
Affiliations:
1. Institute of Electrophysics, Ural Branch
Issue: Vol 60, No 1 (2017)
Pages: 46-49
Section: Electronics and Radio Engineering
URL: https://journal-vniispk.ru/0020-4412/article/view/159480
DOI: https://doi.org/10.1134/S0020441217010213
ID: 159480

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The possibility of adjusting the output voltage of a high-voltage nanosecond pulse generator with inductive energy storage and a solid-state switching system was investigated. All components of the adjustment system are installed in the low-voltage input circuit of the generator, whose voltage was less than 1000 V. The smooth adjustment of the output voltage in the range of 70–115 kV was achieved. The experimental setup and the obtained results are described.