Transformation of Heavy Oil Components in the Process of Initiated Cracking

N. N. Sviridenko; Свириденко Н. Н.; G. S. Pevneva; Певнева Г. С.; N. G. Voronetskaya; Воронецкая Н. Г.; I. S. Korol; Король И. С.

doi:10.31857/S0023117723020147

Transformation of Heavy Oil Components in the Process of Initiated Cracking

Autores: Sviridenko N.N.¹, Pevneva G.S.¹, Voronetskaya N.G.¹, Korol I.S.²
Afiliações:
1. Institute of Petroleum Chemistry, Siberian Branch, Russian Academy of Sciences
2. Tomsk Division of Trofimuk Institute of Petroleum–Gas Geology and Geophysics, Siberian Branch, Russian Academy of Sciences
Edição: Nº 2-3 (2023)
Páginas: 78-85
Seção: Articles
URL: https://journal-vniispk.ru/0023-1177/article/view/140058
DOI: https://doi.org/10.31857/S0023117723020147
EDN: https://elibrary.ru/CBKSKB
ID: 140058

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

In this work, the effect of butyl bromide on the thermal transformations of heavy oil from the Karmalskoye field (Republic of Tatarstan) in the presence of an initiating additive, n-butyl bromide, was studied. It was shown that the addition of butyl bromide increased the yield of gasoline and diesel fractions due to the destruction of high-molecular-weight components. It was established that almost all bromine from butyl bromide entered the compaction products upon the cracking of heavy oil, and butyl radicals entered the composition of gaseous products. It was noted that the direction of thermal transformations of hydrocarbons changed in the presence of butyl bromide. As compared to the initial oil, the amount of low-molecular-weight alkanes and isoprenoids increased significantly, the concentration of cyclohexanes and cyclopentanes decreased, and tri-, tetra- and pentacyclic saturated hydrocarbons were completely destroyed.

Palavras-chave

heavy oil, resins, asphaltenes, initiating additive, butyl bromide, hydrocarbons, transformations, cracking

Bibliografia

Нальгиева Х.В., Копытов М.А. // ХТТ. 2022. № 2. С. 34. [Nal’gieva Kh.V., Kopytov M.A. // Solid Fuel Chem. 2022. vol. 56. № 2. P. 116. https://doi.org/10.3103/S036152192202007010.3103/S0361521922020070]https://doi.org/10.31857/S0023117722020074
Mukhamatdinov I.I., Khaidarova A.R., Mukhamatdinova R.E., Affane B., Vakhin. A.V. // Fuel. 2022. V. 312. P. 123005. https://doi.org/10.1016/j.fuel.2021.123005
Уразов Х.Х., Свириденко Н.Н. // ХТТ. 2022. № 2. С. 46. [Urazov K.K., Sviridenko N.N. // Solid Fuel Chem. 2022. vol. 56. № 2. P. 128. https://doi.org/10.3103/S036152192202010010.3103/S0361521922020100]https://doi.org/10.31857/S0023117722020104
Гончаров А.В., Кривцов Е.Б. // Нефтехимия. 2021. Т. 61. № 5. С. 704. [Goncharov A.V., Krivtsov E.B. // Pet. Chem. 2021. vol. 61. № 9. P. 1071. https://doi.org/10.1134/S096554412109006110.1134/S0965544121090061]https://doi.org/10.31857/S0028242121050130
Prado Glaucia H.C., de Klerk A. // Energy Fuels. 2014. V. 28. P. 4458. https://doi.org/10.1021/acs.energyfuels.7b02004
Alemán-Vázquez L.O., Cano-Domínguez J.L., García-Gutiérrez J.L. // Procedia Eng. 2012. V. 42. P. 532. https://doi.org/10.1016/j.proeng.2012.07.445
Певнева Г.С., Воронецкая Н.Г., Свириденко Н.Н., Головко А.К. // Химия в интересах устойчивого развития. 2019. Т. 27. № 1. С. 45. [Pevneva G.S., Voronetskaya N.G., Sviridenko N.N., Golovko A.K. // Chemistry for Sustainable Development. 2019. № 1. P. 36. https://doi.org/10.15372/CSD2019010710.15372/CSD20190107]https://doi.org/10.15372/KhUR20190107
Darouich T.Al., Behar F., Largeau C. // Organic Geochemistry. 2006. V. 37. P. 1130.
Гордадзе Г.Н., Гируц М.В., Кошелев В.Н., Юсупова Т.Н. // Нефтехимия. 2015. Т. 55. № 1. С. 25. [Gordadze G.N., Giruts M.V., Koshelev V.N., Yusupova T.N. // Pet. Chem. 2015. vol. 55. № 1. P. 22. https://doi.org/10.1134/S0965544115010053]https://doi.org/10.7868/S0028242115010050.