Отправить статью по E-mail Bending of a Round Plate under Gas Pressure
- Авторы: Il’gamov M.A.1,2,3,4, Moiseeva V.E.2
-
Учреждения:
- Blagonravov Institute of Mechanical Engineering
- Institute of Mechanics and Engineering of the Kazan Scientific Center of RAS
- Bashkir State University
- Institute of Mechanics of the Ufa Scientific Center
- Выпуск: Том 54, № 4 (2019)
- Страницы: 551-558
- Раздел: Article
- URL: https://journal-vniispk.ru/0025-6544/article/view/164090
- DOI: https://doi.org/10.3103/S0025654419040083
- ID: 164090
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
The effect of the average excess pressure of the environment on the linear and nonlinear bending of a round plate is studied. Different values of the gas pressure on both surfaces of the plate form a transverse distributed load, consisting of a differential pressure and the interaction of the average pressure with the curvature of the middle surface. With a small ratio of the average pressure to the elastic modulus of the material and with a large relative thickness, the influence of the second component of the bending load is small. With a large ratio of the average pressure to the elastic modulus and a small relative thickness, this effect is significant.
Ключевые слова
Об авторах
M. Il’gamov
Blagonravov Institute of Mechanical Engineering; Institute of Mechanics and Engineering of the Kazan Scientific Center of RAS; Bashkir State University; Institute of Mechanics of the Ufa Scientific Center
Автор, ответственный за переписку.
Email: ilgamov@anrb.ru
Россия, Malyi Kharitonievskii per. 4, Moscow, 101990; ul. Lobachevskogo 2/31, Kazan, 420111; ul. Zaki Validi 32, Ufa, 450076; pr. Oktyabrya 71, Ufa, 450054
V. Moiseeva
Institute of Mechanics and Engineering of the Kazan Scientific Center of RAS
Email: ilgamov@anrb.ru
Россия, ul. Lobachevskogo 2/31, Kazan, 420111
Дополнительные файлы
