Effect of Parameters of Thermal-Rate Treatment of Melt on Iron-Containing Phases in Alloy Al – 15% Si – 2.7% Fe
- Authors: Wang Q.1, Geng H.2, Wang F.2, Lin X.2, Wang C.2
-
Affiliations:
- Yantai Lutong Precision Technology Co. Ltd.
- School of Materials Science and Engineering, University of Jinan
- Issue: Vol 58, No 7-8 (2016)
- Pages: 405-410
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/234989
- DOI: https://doi.org/10.1007/s11041-016-0025-5
- ID: 234989
Cite item
Abstract
The effect of the parameters of thermal-rate treatment of melt on the iron-containing phases in alloy Al – 15% Si – 2.7% Fe is considered. The structure and mechanical properties of the alloy are determined after a thermal-rate treatment conducted at different temperatures of the melt, different pouring temperatures, and different holds at the pouring temperature. The optimum variants of thermal-rate treatment of melt for alloy Al – 15% Si – 2.7% Fe are chosen.
About the authors
Qinglei Wang
Yantai Lutong Precision Technology Co. Ltd.
Email: petroprom2013@yandex.ru
China, Yantai
Haoran Geng
School of Materials Science and Engineering, University of Jinan
Email: petroprom2013@yandex.ru
China, Jinan
Fulan Wang
School of Materials Science and Engineering, University of Jinan
Email: petroprom2013@yandex.ru
China, Jinan
Xiangze Lin
School of Materials Science and Engineering, University of Jinan
Email: petroprom2013@yandex.ru
China, Jinan
Chongyang Wang
School of Materials Science and Engineering, University of Jinan
Email: petroprom2013@yandex.ru
China, Jinan
Supplementary files
