A Study of Free Recovery in a Fe – Mn – Si – Cr Shape Memory Alloy


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Video recording of the free recovery of “hot shape” (typical for the austenitic domain) in shape-memory alloy Fe – 28% Mn – 6% Si – 5% Cr during heating of specimens with a “cold shape” typical for the martensitic domain is performed. Prior to each measurement the specimens are deformed by caliber bending at room temperature in martensitic condition. The thermomechanical training consists in 10 cycles of bending – heating – cooling. Displacements of the free ends of the specimens are plotted as a function of the temperature and the plots are used to determine the critical temperatures of the reverse martensitic transformation.

作者简介

I.-P. Spiridon

The “Gheorge Asachi” Technical University of Iaşi, Faculty of Materials Science and Engineering

编辑信件的主要联系方式.
Email: pricopbogdan@ymail.com
罗马尼亚, Iaşi

N.-M. Lohan

The “Gheorge Asachi” Technical University of Iaşi, Faculty of Materials Science and Engineering

Email: pricopbogdan@ymail.com
罗马尼亚, Iaşi

M.-G. Suru

The “Gheorge Asachi” Technical University of Iaşi, Faculty of Materials Science and Engineering

Email: pricopbogdan@ymail.com
罗马尼亚, Iaşi

E. Mihalache

The “Gheorge Asachi” Technical University of Iaşi, Faculty of Materials Science and Engineering

Email: pricopbogdan@ymail.com
罗马尼亚, Iaşi

L.-G. Bujoreanu

The “Gheorge Asachi” Technical University of Iaşi, Faculty of Materials Science and Engineering

Email: pricopbogdan@ymail.com
罗马尼亚, Iaşi

B. Pricop

The “Gheorge Asachi” Technical University of Iaşi, Faculty of Materials Science and Engineering

Email: pricopbogdan@ymail.com
罗马尼亚, Iaşi

补充文件

附件文件
动作
1. JATS XML

版权所有 © Springer Science+Business Media New York, 2016