Structural Changes Caused by High-Temperature Holding of Powder Shape Memory Alloy 66% Fe – 14% Mn – 6% Si – 9% Cr – 5% Ni
- 作者: Pricop B.1, Özkal B.2, Söyler U.2, Van Humbeeck J.3, Lohan N.M.1, Suru M.1, Spiridon I.1, Bujoreanu L.1
-
隶属关系:
- Faculty of Materials Science and Engineering, the “Gheorghe Asachi” Technical University of Iaşi
- Particlulate Materials Laboratory, Metallurgical and Materials Engineering Department, Istanbul Technical University
- Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven
- 期: 卷 57, 编号 9-10 (2016)
- 页面: 553-558
- 栏目: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235158
- DOI: https://doi.org/10.1007/s11041-016-9921-y
- ID: 235158
如何引用文章
详细
Shape memory alloy Fe – 14Mn – 6Si – 9Cr – 5Ni (wt.%) obtained by cold pressing and sintering of a mixture of powder elements or of mechanically alloyed powder is studied. To compact the alloy additionally the specimens are subjected to hot rolling. Solution treatment of different duration (0.6 – 4.8 ksec) at 1473 K in low vacuum, nitrogen or argon is performed. The structure of the alloy after such treatments is studied by the methods of x-ray diffraction and optical and scanning electron microscopy.
作者简介
B. Pricop
Faculty of Materials Science and Engineering, the “Gheorghe Asachi” Technical University of Iaşi
Email: petroprom2013@yandex.ru
罗马尼亚, Iasi
B. Özkal
Particlulate Materials Laboratory, Metallurgical and Materials Engineering Department, Istanbul Technical University
Email: petroprom2013@yandex.ru
土耳其, Istanbul
U. Söyler
Particlulate Materials Laboratory, Metallurgical and Materials Engineering Department, Istanbul Technical University
Email: petroprom2013@yandex.ru
土耳其, Istanbul
J. Van Humbeeck
Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven
Email: petroprom2013@yandex.ru
比利时, Leuven
N. Lohan
Faculty of Materials Science and Engineering, the “Gheorghe Asachi” Technical University of Iaşi
Email: petroprom2013@yandex.ru
罗马尼亚, Iasi
M.-G. Suru
Faculty of Materials Science and Engineering, the “Gheorghe Asachi” Technical University of Iaşi
Email: petroprom2013@yandex.ru
罗马尼亚, Iasi
I.-P. Spiridon
Faculty of Materials Science and Engineering, the “Gheorghe Asachi” Technical University of Iaşi
Email: petroprom2013@yandex.ru
罗马尼亚, Iasi
L.-G. Bujoreanu
Faculty of Materials Science and Engineering, the “Gheorghe Asachi” Technical University of Iaşi
Email: petroprom2013@yandex.ru
罗马尼亚, Iasi
补充文件
