Email this article A Study of the Microstructure and Mechanical Properties of Medium-Carbon Steel 40KhGNM After Warm Swaging
- Authors: Dedyulina O.K.1, Salishchev G.A.1, Pertsev A.S.2
-
Affiliations:
- Belgorod State National Research University
- Perm Research University of Technology
- Issue: Vol 58, No 3-4 (2016)
- Pages: 132-137
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235423
- DOI: https://doi.org/10.1007/s11041-016-9976-9
- ID: 235423
Cite item
Open Access
Access granted
Subscription Access
Abstract
The effect of the temperature and degree of deformation during warm swaging on the evolution of the microstructure and mechanical properties of preliminarily quenched medium-carbon steel 40KhGNM is studied. It is shown that the deformation produces an ultrafine-grained structure with ferrite grains elongated over the longitudinal direction and fine distributed nanocarbides.
About the authors
O. K. Dedyulina
Belgorod State National Research University
Email: gsal@mail.ru
Russian Federation, Belgorod
G. A. Salishchev
Belgorod State National Research University
Author for correspondence.
Email: gsal@mail.ru
Russian Federation, Belgorod
A. S. Pertsev
Perm Research University of Technology
Email: gsal@mail.ru
Russian Federation, Perm
Supplementary files
