Email this article Effect of Microstructure and Segregation of Elements on the Impact Toughness of High-Strength Low-Carbon Bainitic Steel
- Authors: Minxian D.1,2, Huaxia P.1, Hongbin T.3, Li S.3, Ling O.1
-
Affiliations:
- School of Metallurgical Engineering, Hunan University of Technology
- School of Materials Science and Engineering, Central South University
- AVIC Aviation Powerplant Research Institute
- Issue: Vol 58, No 3-4 (2016)
- Pages: 138-141
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235426
- DOI: https://doi.org/10.1007/s11041-016-9977-8
- ID: 235426
Cite item
Open Access
Access granted
Subscription Access
Abstract
The impact toughness, microstructure and distribution of elements over the thickness of a plate from high-strength low-carbon bainitic steel are studied with the use of the methods of EPMA and EBSD. The causes of low impact toughness of the high-strength steel are analyzed.
About the authors
Du Minxian
School of Metallurgical Engineering, Hunan University of Technology; School of Materials Science and Engineering, Central South University
Email: petroprom2013@yandex.ru
China, Zhuzhou; Changsha
Peng Huaxia
School of Metallurgical Engineering, Hunan University of Technology
Email: petroprom2013@yandex.ru
China, Zhuzhou
Tian Hongbin
AVIC Aviation Powerplant Research Institute
Email: petroprom2013@yandex.ru
China, Zhuzhou
Sun Li
AVIC Aviation Powerplant Research Institute
Email: petroprom2013@yandex.ru
China, Zhuzhou
Ou Ling
School of Metallurgical Engineering, Hunan University of Technology
Email: petroprom2013@yandex.ru
China, Zhuzhou
Supplementary files
