Email this article Estimation of the Quality of Gas Laser Sawing of Sheets of Aluminum Alloys
- Authors: Fizulakov R.A.1, Murav’ev V.I.1, Pitsyk V.S.1
-
Affiliations:
- Komsomolsk-on-Amur State Technical University
- Issue: Vol 58, No 3-4 (2016)
- Pages: 147-152
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235431
- DOI: https://doi.org/10.1007/s11041-016-9979-6
- ID: 235431
Cite item
Open Access
Access granted
Subscription Access
Abstract
The effect of gas laser sawing on the properties of the cut edges of aluminum alloys is studied. Recommendations on application of gas laser sawing are developed. The main criteria for estimating the optimum speed of gas laser sawing of aluminum alloys are determined.
About the authors
R. A. Fizulakov
Komsomolsk-on-Amur State Technical University
Author for correspondence.
Email: ktsp@knastu.ru
Russian Federation, Komsomolsk-on-Amur
V. I. Murav’ev
Komsomolsk-on-Amur State Technical University
Email: ktsp@knastu.ru
Russian Federation, Komsomolsk-on-Amur
V. S. Pitsyk
Komsomolsk-on-Amur State Technical University
Email: ktsp@knastu.ru
Russian Federation, Komsomolsk-on-Amur
Supplementary files
