Email this article Effect of Production Process on Microstructure and Mechanical Properties of Copper Coatings of Jet Charges
- Authors: Gleener R.E.1, Cheerova M.N.1, Shadiev B.S.2, Katyukhin E.B.2
-
Affiliations:
- R. E. Alekseev Nizhegorodsky Engineering University
- Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
- Issue: Vol 59, No 3-4 (2017)
- Pages: 176-179
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235613
- DOI: https://doi.org/10.1007/s11041-017-0124-y
- ID: 235613
Cite item
Open Access
Access granted
Subscription Access
Abstract
Special features of formation of the grain structure and mechanical properties of copper during recrystallization annealing after cold deformation with a wide range of reduction are studied. The constants of the Hall-Petch equation are determined for copper, the microstructure of which forms in the course of plastic deformation and subsequent heat treatment. The results of the study are allowed for in the process of production of claddings for jet charges.
About the authors
R. E. Gleener
R. E. Alekseev Nizhegorodsky Engineering University
Author for correspondence.
Email: gleen1@yandex.ru
Russian Federation, Nizhny Novgorod
M. N. Cheerova
R. E. Alekseev Nizhegorodsky Engineering University
Email: gleen1@yandex.ru
Russian Federation, Nizhny Novgorod
B. Sh. Shadiev
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Email: gleen1@yandex.ru
Russian Federation, Sarov
E. B. Katyukhin
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Email: gleen1@yandex.ru
Russian Federation, Sarov
Supplementary files
