Email this article Fabrication, Structure and Properties of a Composite from Aluminum Matrix Reinforced with Carbon Nanofibers
- Authors: Tsemenko V.N.1, Tolochko O.V.1, Kol’tsova T.S.1, Ganin S.V.1, Mikhailov V.G.1,2
-
Affiliations:
- Peter the Great St. Petersburg Polytechnic University
- Brandenburg University of Technology
- Issue: Vol 60, No 1-2 (2018)
- Pages: 24-31
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/236264
- DOI: https://doi.org/10.1007/s11041-018-0235-0
- ID: 236264
Cite item
Open Access
Access granted
Subscription Access
Abstract
An effective process for fabricating a composite aluminum-base material reinforced with carbon nanofibers, which includes introduction of nanoparticles into an aluminum matrix, optimization of the size composition of the powder mixture, compaction, and plastic deformation of preforms by hot extrusion, is described.
About the authors
V. N. Tsemenko
Peter the Great St. Petersburg Polytechnic University
Email: s.v.ganin@gmail.com
Russian Federation, St. Petersburg
O. V. Tolochko
Peter the Great St. Petersburg Polytechnic University
Email: s.v.ganin@gmail.com
Russian Federation, St. Petersburg
T. S. Kol’tsova
Peter the Great St. Petersburg Polytechnic University
Email: s.v.ganin@gmail.com
Russian Federation, St. Petersburg
S. V. Ganin
Peter the Great St. Petersburg Polytechnic University
Author for correspondence.
Email: s.v.ganin@gmail.com
Russian Federation, St. Petersburg
V. G. Mikhailov
Peter the Great St. Petersburg Polytechnic University; Brandenburg University of Technology
Email: s.v.ganin@gmail.com
Russian Federation, St. Petersburg; Cottbus
Supplementary files
