Email this article Variation of the Composition and Properties of Cementite in Heat Treatment of Tilling Machine Members from Chilled Cast Iron
- Authors: Kostyleva L.V.1, Gapich D.S.1, Novikov A.E.2,3,4, Motorin V.A.1,3
-
Affiliations:
- Volgograd State Rural University
- Volgograd State Technical University
- Federal State Budgetary Scientific Institution “All-Russia Research Institute of Irrigated Agriculture”
- RUDN University
- Issue: Vol 61, No 3-4 (2019)
- Pages: 205-210
- Section: Cast Iron
- URL: https://journal-vniispk.ru/0026-0673/article/view/236592
- DOI: https://doi.org/10.1007/s11041-019-00401-6
- ID: 236592
Cite item
Open Access
Access granted
Subscription Access
Abstract
Results of a study of white iron cementite in binary Fe – C and ternary Fe – C – Si compositions and in castings of unalloyed white iron with traditional composition are presented. It is shown that the hardness and the corrosion strength of the cementite may vary in a wide range depending on the rate of cooling of the iron after crystallization. Optimum processes for casting and heat treatment of members of tilling machines from chilled cast iron are developed for raising their strength and wear resistance.
About the authors
L. V. Kostyleva
Volgograd State Rural University
Author for correspondence.
Email: kostyleva.v.l@yandex.ru
Russian Federation, Volgograd
D. S. Gapich
Volgograd State Rural University
Email: kostyleva.v.l@yandex.ru
Russian Federation, Volgograd
A. E. Novikov
Volgograd State Technical University; Federal State Budgetary Scientific Institution “All-Russia Research Institute of Irrigated Agriculture”; RUDN University
Email: kostyleva.v.l@yandex.ru
Russian Federation, Volgograd; Volgograd; Moscow
V. A. Motorin
Volgograd State Rural University; Federal State Budgetary Scientific Institution “All-Russia Research Institute of Irrigated Agriculture”
Email: kostyleva.v.l@yandex.ru
Russian Federation, Volgograd; Volgograd
Supplementary files
