Structural-Morphological Fluctuations Induced by Thermomechanical Treatment in a Fe – Mn – Si Shape Memory Alloy

N. Cimpoesu; E. Mihalache; N.-M. Lohan; M.-G. Suru; R. I. Comãneci; B. Özkal; L.-G. Bujoreanu; B. Pricop

doi:10.1007/s11041-018-0303-5

Structural-Morphological Fluctuations Induced by Thermomechanical Treatment in a Fe – Mn – Si Shape Memory Alloy

Авторлар: Cimpoesu N.¹, Mihalache E.¹, Lohan N.¹, Suru M.¹, Comãneci R.I.¹, Özkal B.², Bujoreanu L.¹, Pricop B.¹
Мекемелер:
1. Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iasi
2. Particulate Materials Laboratory, Metallurgical and Materials Engineering Department, Istanbul Technical University
Шығарылым: Том 60, № 7-8 (2018)
Беттер: 471-477
Бөлім: Article
URL: https://journal-vniispk.ru/0026-0673/article/view/236402
DOI: https://doi.org/10.1007/s11041-018-0303-5
ID: 236402

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Қосымша файлдар
Статистика

Аннотация

Variation of the sizes and chemical compositions of martensite plates in the structure of powder-metallurgy shape memory alloy Fe – 14 wt.% Mn – 6 wt.% Si – 9 wt.% Cr – 5 wt.% Ni is studied. Apart of the specimens is fabricated from mechanically alloyed powder. Tensile tests of the alloy are performed after 4% deformation and after deformation and heat treatment at 700 and 1100°C. The effect of the treatment on the structure of the alloy is determined.