Structural-Morphological Fluctuations Induced by Thermomechanical Treatment in a Fe – Mn – Si Shape Memory Alloy

N. Cimpoesu; E. Mihalache; N.-M. Lohan; M.-G. Suru; R. I. Comãneci; B. Özkal; L.-G. Bujoreanu; B. Pricop

doi:10.1007/s11041-018-0303-5

Structural-Morphological Fluctuations Induced by Thermomechanical Treatment in a Fe – Mn – Si Shape Memory Alloy

Авторы: Cimpoesu N.¹, Mihalache E.¹, Lohan N.¹, Suru M.¹, Comãneci R.I.¹, Özkal B.², Bujoreanu L.¹, Pricop B.¹
Учреждения:
1. Faculty of Materials Science and Engineering, “Gheorghe Asachi” Technical University of Iasi
2. Particulate Materials Laboratory, Metallurgical and Materials Engineering Department, Istanbul Technical University
Выпуск: Том 60, № 7-8 (2018)
Страницы: 471-477
Раздел: Article
URL: https://journal-vniispk.ru/0026-0673/article/view/236402
DOI: https://doi.org/10.1007/s11041-018-0303-5
ID: 236402

Цитировать

Полный текст

Открытый доступ
Доступ закрыт

Доступ предоставлен
Доступ закрыт

Только для подписчиков

Аннотация
Об авторах
Список литературы
Дополнительные файлы
Статистика

Аннотация

Variation of the sizes and chemical compositions of martensite plates in the structure of powder-metallurgy shape memory alloy Fe – 14 wt.% Mn – 6 wt.% Si – 9 wt.% Cr – 5 wt.% Ni is studied. Apart of the specimens is fabricated from mechanically alloyed powder. Tensile tests of the alloy are performed after 4% deformation and after deformation and heat treatment at 700 and 1100°C. The effect of the treatment on the structure of the alloy is determined.