Hardening of Austenitic Nitrogen High-Manganese Aluminum Alloys Under Heat and Thermomechanical Treatment
- Autores: Kaputkina L.M.1, Svyazhin A.G.1, Smarygina I.V.1
-
Afiliações:
- National University of Science and Technology “MISiS” (NITU “MISiS”)
- Edição: Volume 57, Nº 11-12 (2016)
- Páginas: 705-712
- Seção: Structural Steels and Alloys
- URL: https://journal-vniispk.ru/0026-0673/article/view/235274
- DOI: https://doi.org/10.1007/s11041-016-9946-2
- ID: 235274
Citar
Resumo
The effect of the contents of aluminum, carbon and nitrogen on the production of thermally and mechanically stable austenitic alloys based on the Fe – (20 – 25)% Mn – (5 – 10)% Al – (0 – 10)% Ni – C – N system and the efficiency of the hardening of such alloys by nitrogen additives are studied computationally and experimentally. The experimental results confirm the adequacy of the computation of the phase composition and of the estimation of the solid-solution and precipitation hardening of these alloys.
Sobre autores
L. Kaputkina
National University of Science and Technology “MISiS” (NITU “MISiS”)
Autor responsável pela correspondência
Email: kaputkina@mail.ru
Rússia, Moscow
A. Svyazhin
National University of Science and Technology “MISiS” (NITU “MISiS”)
Email: kaputkina@mail.ru
Rússia, Moscow
I. Smarygina
National University of Science and Technology “MISiS” (NITU “MISiS”)
Email: kaputkina@mail.ru
Rússia, Moscow
Arquivos suplementares
