The Influence of High-Pressure Gas Nitriding on the Properties of Martensitic Steels
- Autores: Alekseeva M.S.1,2, Gress M.A.3, Scherbakov S.P.3, Gerasimov S.A.3, Kuksenova L.I.3,2
-
Afiliações:
- All-Russia Institute of Aviation Materials (VIAM)
- Mechanical Engineering Research Institute, Russian Academy of Sciences
- N. É. Bauman Moscow State Technical University
- Edição: Volume 59, Nº 7-8 (2017)
- Páginas: 524-528
- Seção: Thermochemical Treatment
- URL: https://journal-vniispk.ru/0026-0673/article/view/235890
- DOI: https://doi.org/10.1007/s11041-017-0183-0
- ID: 235890
Citar
Resumo
The influence of high-pressure gas nitriding on the structure and properties of martensitic steels VKS-5, VKS-7, 20Kh3N3MFB, and 25Kh5M is investigated. It is shown that the high-pressure nitriding increases the thickness of the diffusion zone at substantial reduction of the process time as compared to the traditional gas-phase nitriding. Increase of the post-treatment cooling rate above 30 K/min favors the formation of diffusion layers with greater hardness.
Sobre autores
M. Alekseeva
All-Russia Institute of Aviation Materials (VIAM); Mechanical Engineering Research Institute, Russian Academy of Sciences
Autor responsável pela correspondência
Email: alekseeva_ms@list.ru
Rússia, Moscow; Moscow
M. Gress
N. É. Bauman Moscow State Technical University
Email: alekseeva_ms@list.ru
Rússia, Moscow
S. Scherbakov
N. É. Bauman Moscow State Technical University
Email: alekseeva_ms@list.ru
Rússia, Moscow
S. Gerasimov
N. É. Bauman Moscow State Technical University
Email: alekseeva_ms@list.ru
Rússia, Moscow
L. Kuksenova
N. É. Bauman Moscow State Technical University; Mechanical Engineering Research Institute, Russian Academy of Sciences
Email: alekseeva_ms@list.ru
Rússia, Moscow; Moscow
Arquivos suplementares
