Effect of Nitriding on the Wear Resistance of Tool Powder Steels with Different Contents of V, Cr and Mo

Aydin Şelte; Burak Özkal; Koray Arslan; Sakine Ülker; Aziz Hatman

doi:10.1007/s11041-018-0218-1

Effect of Nitriding on the Wear Resistance of Tool Powder Steels with Different Contents of V, Cr and Mo

Autores: Şelte A.¹^,2, Özkal B.¹, Arslan K.², Ülker S.², Hatman A.²
Afiliações:
1. Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Department of Metallurgy and Materials Engineering
2. Böhler Uddeholm (Turkey), TOSB (Taysad OIZ)
Edição: Volume 59, Nº 11-12 (2018)
Páginas: 729-734
Seção: Article
URL: https://journal-vniispk.ru/0026-0673/article/view/236238
DOI: https://doi.org/10.1007/s11041-018-0218-1
ID: 236238

Citar

Texto integral

Acesso aberto
Acesso é fechado

Acesso está concedido
Acesso é fechado

Somente assinantes

Resumo
Sobre autores
Bibliografia
Arquivos suplementares
Estatísticas

Resumo

Powder steels Vanadis 4 Extra, Vanadis 6 and Vanadis 10 with different contents of V, Cr and Mo are studied after 180-min nitriding at 570°C at nitrogen potential K_N = 2 and 10. The resistance of the steels to abrasive wear and the Vickers hardness of the surface layers are determined. An x-ray diffraction analysis is performed. Nitriding modes raising the endurance of tools from the powder steels are suggested.

Sobre autores

Aydin Şelte

Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Department of Metallurgy and Materials Engineering; Böhler Uddeholm (Turkey), TOSB (Taysad OIZ)

Email: petroprom2013@yandex.ru
Turquia, Istanbul; Kocaeli