Effect of Nitriding on the Wear Resistance of Tool Powder Steels with Different Contents of V, Cr and Mo

Aydin Şelte; Burak Özkal; Koray Arslan; Sakine Ülker; Aziz Hatman

doi:10.1007/s11041-018-0218-1

Effect of Nitriding on the Wear Resistance of Tool Powder Steels with Different Contents of V, Cr and Mo

作者: Şelte A.¹^,2, Özkal B.¹, Arslan K.², Ülker S.², Hatman A.²
隶属关系:
1. Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Department of Metallurgy and Materials Engineering
2. Böhler Uddeholm (Turkey), TOSB (Taysad OIZ)
期: 卷 59, 编号 11-12 (2018)
页面: 729-734
栏目: Article
URL: https://journal-vniispk.ru/0026-0673/article/view/236238
DOI: https://doi.org/10.1007/s11041-018-0218-1
ID: 236238

如何引用文章

全文:

开放存取

##reader.subscriptionAccessGranted##
受限制的访问

订阅存取

详细
作者简介
参考
补充文件
统计

详细

Powder steels Vanadis 4 Extra, Vanadis 6 and Vanadis 10 with different contents of V, Cr and Mo are studied after 180-min nitriding at 570°C at nitrogen potential K_N = 2 and 10. The resistance of the steels to abrasive wear and the Vickers hardness of the surface layers are determined. An x-ray diffraction analysis is performed. Nitriding modes raising the endurance of tools from the powder steels are suggested.

作者简介

Aydin Şelte

Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Department of Metallurgy and Materials Engineering; Böhler Uddeholm (Turkey), TOSB (Taysad OIZ)

Email: petroprom2013@yandex.ru
土耳其, Istanbul; Kocaeli