A Procedure for Determining Force/Power Parameters of the Conform Process with Prechamber
- Authors: Gorokhov Y.V.1, Mochalin I.V.2, Belyaev S.V.1, Gubanov I.Y.1
-
Affiliations:
- Siberian Federal University
- Kamensk-Uralsky Non-Ferrous Metal Working Plant
- Issue: Vol 60, No 11-12 (2017)
- Pages: 1273-1276
- Section: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/239773
- DOI: https://doi.org/10.1007/s11015-017-0440-x
- ID: 239773
Cite item
Abstract
The subject of analysis is the real process of continuous extrusion of copper section on a Conform machine with a prechamber. The machine is operated at the Kamensk-Uralsky Non-Ferrous Metal Working Plant. Perlin’s method is used, which involves determining the total pressing force, to calculate the following stability-critical parameters of the Conform process: the length of the split container (which should be such that the frictional force on its movable surface be sufficient for extruding the metal from the prechamber to the die hole), the wheel torque, the power of the electric motor. Comparing the calculated and measured data shows that the discrepancy is less than 8%. The derived equations are simple and easy to use in technical and technological design of the Conform process with prechamber, which is exactly the purpose of this study.
About the authors
Yu. V. Gorokhov
Siberian Federal University
Author for correspondence.
Email: 160949@list.ru
Russian Federation, Krasnoyarsk
I. V. Mochalin
Kamensk-Uralsky Non-Ferrous Metal Working Plant
Email: 160949@list.ru
Russian Federation, Kamensk-Uralsky
S. V. Belyaev
Siberian Federal University
Email: 160949@list.ru
Russian Federation, Krasnoyarsk
I. Yu. Gubanov
Siberian Federal University
Email: 160949@list.ru
Russian Federation, Krasnoyarsk
Supplementary files
