Email this article Development of a Technology for a Hydraulic Radial Forging Machine at the Elektrostal Metallurgical Plant
- Authors: Glushenkova S.G.1, Polozhentsev K.A.1, Dmitriev A.I.1, Gorev I.A.1, Nieschwietz P.2
-
Affiliations:
- Elektrostal Metallurgical Plant
- SMS Group
- Issue: Vol 61, No 5-6 (2017)
- Pages: 394-399
- Section: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/240344
- DOI: https://doi.org/10.1007/s11015-017-0506-9
- ID: 240344
Cite item
Open Access
Access granted
Subscription Access
Abstract
A forging technology for a SMS Meer radial forging machine is described. Installing a radial forging machine is a stage of retrofitting the Elektrostal Metallurgical Plant. The technology was developed at the Elektrostal Metallurgical Plant. Forging sequences for high-speed and high-chromium steels as well as heat-resistant alloys are described. The production of square bars on the radial-forging machine using round-bar dies was tested. The forging sequences for a radial forging machine and free-forging sequences for a 16MN press are compared.
About the authors
S. G. Glushenkova
Elektrostal Metallurgical Plant
Author for correspondence.
Email: Svetlana_606@mail.ru
Russian Federation, Elektrostal
K. A. Polozhentsev
Elektrostal Metallurgical Plant
Email: Svetlana_606@mail.ru
Russian Federation, Elektrostal
A. I. Dmitriev
Elektrostal Metallurgical Plant
Email: Svetlana_606@mail.ru
Russian Federation, Elektrostal
I. A. Gorev
Elektrostal Metallurgical Plant
Email: Svetlana_606@mail.ru
Russian Federation, Elektrostal
P.-J. Nieschwietz
SMS Group
Email: Svetlana_606@mail.ru
Germany, Mönchengladbach
Supplementary files
