Improvement in the Reliability of Mechanical Flux Feed Systems for Continuous Slab-Casting Machine Molds
- Authors: Eron’ko S.P.1, Kuklev A.V.2, Tkachev M.Y.1, Tinyakov V.V.2, Mechik S.V.1
-
Affiliations:
- Donetsk National Technical University State Educational Institution for Higher and Professional Education
- KORAD LLC
- Issue: Vol 62, No 9-10 (2019)
- Pages: 892-899
- Section: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/242357
- DOI: https://doi.org/10.1007/s11015-019-00742-w
- ID: 242357
Cite item
Abstract
We discuss the operating principle and design features for an improved mechanical flux feed system to be used in continuous slab-casting machine molds; this system provides increased reliability and operational efficiency, and is easier to maintain. We describe experimental results for the operating parameters of a combined drive for use in such a mechanical flux feed system, as well as validation of the design, kinematic and power consumption parameters for such drives.
Keywords
About the authors
S. P. Eron’ko
Donetsk National Technical University State Educational Institution for Higher and Professional Education
Author for correspondence.
Email: ersp@meta.ua
Ukraine, Donetsk
A. V. Kuklev
KORAD LLC
Email: ersp@meta.ua
Russian Federation, Moscow
M. Yu. Tkachev
Donetsk National Technical University State Educational Institution for Higher and Professional Education
Email: ersp@meta.ua
Ukraine, Donetsk
V. V. Tinyakov
KORAD LLC
Email: ersp@meta.ua
Russian Federation, Moscow
S. V. Mechik
Donetsk National Technical University State Educational Institution for Higher and Professional Education
Email: ersp@meta.ua
Ukraine, Donetsk
Supplementary files
