Email this article Electron-Beam Surface Treatment of Titanium Alloy Ingots. Part 2
- Authors: Akhonin S.V.1, Pikulin A.N.1, Klochai V.V.2, Ryabtsev A.D.2
-
Affiliations:
- E. O. Paton Electric Welding Institute, Ukrainian Academy of Sciences
- PAO Ruspolimet
- Issue: Vol 63, No 3-4 (2019)
- Pages: 295-299
- Section: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/242769
- DOI: https://doi.org/10.1007/s11015-019-00823-w
- ID: 242769
Cite item
Open Access
Access granted
Subscription Access
Abstract
On the basis of results of modelling [1] a series of experiments is conducted for electron beam treatment (EBT) of titanium alloy VT6, VT20, VT22, and VT3-1 ingots 400 and 600 mm in diameter. As a result of this work parameters are established for titanium alloy ingot EBT making it possible to remove surface defects effectively with retention of the chemical composition of the melted layer at the level of standard specifications providing good surface quality and an increase in the yield of finished metal by up to 6%.
About the authors
S. V. Akhonin
E. O. Paton Electric Welding Institute, Ukrainian Academy of Sciences
Author for correspondence.
Email: akhonin.sv@gmail.com
Ukraine, Kiev
A. N. Pikulin
E. O. Paton Electric Welding Institute, Ukrainian Academy of Sciences
Email: akhonin.sv@gmail.com
Ukraine, Kiev
V. V. Klochai
PAO Ruspolimet
Email: akhonin.sv@gmail.com
Russian Federation, Kulebaki
A. D. Ryabtsev
PAO Ruspolimet
Email: akhonin.sv@gmail.com
Russian Federation, Kulebaki
Supplementary files
