Special Titanium-Containing Coating Application Technology
- Authors: Mirgorodskii S.I.1, Bitsoev G.D.1, Mirgorodskii L.2, Kaigorodov S.V.1
-
Affiliations:
- D. Serikbaev East-Kazajhstan State Technical University
- Peter the Great St Petersburg Polytechnic University
- Issue: Vol 63, No 3-4 (2019)
- Pages: 308-319
- Section: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/242780
- DOI: https://doi.org/10.1007/s11015-019-00825-8
- ID: 242780
Cite item
Abstract
The article provides results of production process development for titanium-containing coating deposition by diffusion sintering of metal pastes in vacuum. Coating preparation on steel 20 specimens is studied. A paste is applied to specimens by a screen printing scheme in order to stabilize applied layer thickness. Diffusion sintering of a metal coating in a vacuum furnace is conducted at three different temperatures: 800, 1000, and 1200 °C. The distribution and variation of the number of chemical elements and microhardness values in an applied coating, the diffusion (transition) zone, and the base metal is studied. The change in the phase composition of a titanium-containing coating at a surface is determined.
About the authors
S. I. Mirgorodskii
D. Serikbaev East-Kazajhstan State Technical University
Author for correspondence.
Email: serg.mirg@yandex.ru
Kazakhstan, Ust’-Kamenogorsk
G. D. Bitsoev
D. Serikbaev East-Kazajhstan State Technical University
Email: serg.mirg@yandex.ru
Kazakhstan, Ust’-Kamenogorsk
L. Mirgorodskii
Peter the Great St Petersburg Polytechnic University
Email: serg.mirg@yandex.ru
Russian Federation, St Petersburg
S. V. Kaigorodov
D. Serikbaev East-Kazajhstan State Technical University
Email: serg.mirg@yandex.ru
Kazakhstan, Ust’-Kamenogorsk
Supplementary files
