Email this article Study of the Effect of Vibration Treatment of Porous Sintered Workpiece Treatment on Structure and Properties of Hot-Forged Powder Object Surface Layer
- Authors: Batienkov V.T.1, Batienkov R.V.2
-
Affiliations:
- M. I. Platov South-Russia State Polytechnic University (NPI)
- All-Russia Scientific Research Institute of Aviation Materials
- Issue: Vol 63, No 5-6 (2019)
- Pages: 642-650
- Section: Article
- URL: https://journal-vniispk.ru/0026-0894/article/view/242987
- DOI: https://doi.org/10.1007/s11015-019-00870-3
- ID: 242987
Cite item
Open Access
Access granted
Subscription Access
Abstract
A number of combine-harvester components are produced by mass production of hot-forged sintered powder blanks in the at “Rostsel’mash” plant. With the aim of improving the structure and properties of a component surface layer before hot forging sintered workpieces are subjected to vibration treatment with application of a lubricant coating. Component surface layer structure is studied and properties are determined. A reduction is established in material overall degree and local decarburization, and wear resistance is improved by a factor of 1.35–1.4.
Keywords
About the authors
V. T. Batienkov
M. I. Platov South-Russia State Polytechnic University (NPI)
Author for correspondence.
Email: v.batienkov@mail.ru
Russian Federation, Novocherkassk
R. V. Batienkov
All-Russia Scientific Research Institute of Aviation Materials
Email: v.batienkov@mail.ru
Russian Federation, Moscow
Supplementary files
