Edição |
Título |
Arquivo |
Volume 60, Nº 3-4 (2016) |
Optimizing the Fabrication of the Titanium Sections of Pressure Vessels |
 (Eng)
|
Chumachenko E., Logashina I., Zakhar’ev I.
|
Volume 60, Nº 3-4 (2016) |
Sulfuric Acid Leaching of High-Arsenic Dust from Copper Smelting |
 (Eng)
|
Karimov K., Naboichenko S.
|
Volume 60, Nº 3-4 (2016) |
Development of Aluminum Composites with Small Additions of Ceramic Nanoparticles |
 (Eng)
|
Agureev L., Kostikov V., Eremeeva Z., Ashmarin A., Rudshtein R.
|
Volume 60, Nº 3-4 (2016) |
Mastering the Production of 40- and 60-mm-Diam. Grinding Balls in Hardness Classes III and IV at the Donetsk Metal-Rolling Plant |
 (Eng)
|
Lam M., Serov A., Smirnov E., Ternavskii A., Bazarova G.
|
Volume 60, Nº 3-4 (2016) |
Surface Modification of Products by Plastic Deformation and the Application of Functional Coatings |
 (Eng)
|
Belevskii L., Belevskaya I., Belov V., Gubarev E., Efimova Y.
|
Volume 60, Nº 3-4 (2016) |
Structure and Contact Fatigue Strength of Heat-Resistant Steel VKS-7 Hardened Layers After Ion-Plasma Nitriding |
 (Eng)
|
Gerasimov S., Kuksenova L., Semenov M., Smirnov A., Shcherbakov S.
|
Volume 60, Nº 3-4 (2016) |
Comparative Analysis of the Structure and Phase States and Defect Substructure of Bulk and Differentially Quenched Rails |
 (Eng)
|
Morozov K., Gromov V., Ivanov Y., Yur’ev A., Aksenova K.
|
Volume 60, Nº 3-4 (2016) |
Development of Low-Carbon Steel Alloyed with Copper for Pipeline Fittings Prepared by Hot Stamping |
 (Eng)
|
Matrosov M., Martynov P., Kichkina A., Talanov O., Korchagin A., Sychev O., Mikheev V.
|
Volume 60, Nº 3-4 (2016) |
Effect of Bainite Crystallographic Texture on Failure of Pipe Steel Sheets Made by Controlled Thermomechanical Treatment |
 (Eng)
|
Pyshmintsev I., Struin A., Gervasyev A., Lobanov M., Rusakov G., Danilov S., Arabey A.
|
Volume 60, Nº 3-4 (2016) |
Reducing Dust Emission During the Sintering of Iron Ores by Using the Energy of an Acoustic Field |
 (Eng)
|
Matyukhin V., Yaroshenko Y., Matyukhin O.
|
Volume 60, Nº 3-4 (2016) |
Operation of Large EAFS with the Use of Different Energy Resources and Raw Materials |
 (Eng)
|
Grant M., Blostein P., But S.
|
Volume 60, Nº 3-4 (2016) |
Efficient Configuration for the Vent System of a 250-Ton Steel-Pouring Ladle |
 (Eng)
|
Piptyuk V., Mos’pan V., Motsnyi V., Pavlov S., Andrievskii G., Grekov S.
|
Volume 60, Nº 3-4 (2016) |
Choosing a System for the Slit-Rolling of Rebars |
 (Eng)
|
Starkov N., Bobarikin Y.
|
Volume 60, Nº 3-4 (2016) |
Structural State Evolution and Rolled Product Properties in Relation to Treatment Regime of Model Steels for Hot Stamping. 2. Cold-Rolled Product* |
 (Eng)
|
Zaitsev A., Koldaev A., Gladchenkova Y., Shaposhnikov N., Dunaev S.
|
Volume 60, Nº 3-4 (2016) |
Study of the Properties of the Base Metal of Large-Diameter Pipes Under Alternating Loading |
 (Eng)
|
Mentyukov K., Bortsov A., Shabalov I., Mansyrev E.
|
Volume 60, Nº 1-2 (2016) |
Factors Affecting Housing and Utilities Pipe Corrosion Resistance |
 (Eng)
|
Mitrofanov A., Petrova M., Kirillov I., Rodionova I., Udod K., Endel’ N.
|
Volume 60, Nº 1-2 (2016) |
Effect of the Degree of Ovality of the Finishing-Stand Passes in a Reeling Mill on the Accuracy Characteristics and Deformation of the Pipe |
 (Eng)
|
Shkuratov E., Vydrin A., Struin D., Chernykh I.
|
Volume 60, Nº 1-2 (2016) |
Calculation of Fusion Zone Size in the Submerged-Arc Hardfacing of Rolling-Mill Rolls |
 (Eng)
|
Matvienko V., Leshchinskii L., Mazur V.
|
Volume 60, Nº 1-2 (2016) |
Cooling of the Tuyere Belt of Horizontal Furnaces |
 (Eng)
|
Bulatov K., Yakornov S., Skopin D., Barsukov N.
|
Volume 60, Nº 1-2 (2016) |
Microstructure and Mechanical Properties of Products of Alloy AL+3%Mg Made by Low-Pressure Casting |
 (Eng)
|
Cais J., Weiss V., Svobodová J.
|
Volume 60, Nº 1-2 (2016) |
Effect of Nanosize Strengthening Particles on the Structure of Aluminum-Based Composite Materials |
 (Eng)
|
Simonova E., Eremeeva Z., Lopatin V., Kaplanskii Y.
|
Volume 60, Nº 1-2 (2016) |
Preventing the Destruction of Hard-Alloy Inserts in Dies Used for the Production of Nichrome and Ferronichrome Strips |
 (Eng)
|
Snigirev A., Zheleznyak L., Karavaev M.
|
Volume 60, Nº 1-2 (2016) |
Properties and Structure Formation in Welded Joints when Welding Steel X65 by Different Technologies |
 (Eng)
|
Fedoseeva E., Yazovskikh V.
|
Volume 60, Nº 1-2 (2016) |
Unit for the Heat Treatment and Straightening of Tubes Used in the Steam Generators of Nuclear Power Plants |
 (Eng)
|
Burkin S., Shimov G., Serebryakov A., Serebryakov A.
|
Volume 60, Nº 1-2 (2016) |
Effect of Carbon and Manganese on Low-Carbon Pipe Steel Hydrogen-Induced Cracking Resistance |
 (Eng)
|
Kholodnyi A., Matrosov Y., Matrosov M., Sosin S.
|
601 - 625 de 725 resultados |
<< < 20 21 22 23 24 25 26 27 28 29 > >>
|