Email this article Influence of the tempering temperature on the mechanical properties and the phase composition of thin sheet TRIP steel
- Authors: Terent’ev V.F.1, Eliseev E.A.2, Matyunin V.M.3, Slizov A.K.1, Marchenkov A.Y.3, Sirotinkin V.P.1, Baikin A.S.1, Seval’nev G.S.2
-
Affiliations:
- Baikov Institute of Metallurgy and Materials Science
- All-Russia Institute of Aviation Materials (VIAM)
- Moscow Power Engineering Institute (National Research University)
- Issue: Vol 2017, No 10 (2017)
- Pages: 867-870
- Section: Applied Problems of Strength and Plasticity
- URL: https://journal-vniispk.ru/0036-0295/article/view/171778
- DOI: https://doi.org/10.1134/S003602951710024X
- ID: 171778
Cite item
Open Access
Access granted
Subscription Access
Abstract
The strength and the plasticity properties of sheet high-strength austenitic–martensitic VNS9-Sh TRIP steel (23Kh15N5AM3-Sh) are studied as functions of the tempering temperature in the range 125–600°C. A nonmonotonic decease in the strength and the plasticity properties of the steel has been detected when the tempering temperature increases, and they increase in the range 300–450°C. The influence of aging processes, the precipitation of carbide, and the phase transformations in tempering on the mechanical properties of austenitic–martensitic corrosion-resistant steel is discussed.
About the authors
V. F. Terent’ev
Baikov Institute of Metallurgy and Materials Science
Author for correspondence.
Email: fatig@mail.ru
Russian Federation, Moscow, 119991
E. A. Eliseev
All-Russia Institute of Aviation Materials (VIAM)
Email: fatig@mail.ru
Russian Federation, Moscow, 105005
V. M. Matyunin
Moscow Power Engineering Institute (National Research University)
Email: fatig@mail.ru
Russian Federation, Moscow, 111250
A. K. Slizov
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Russian Federation, Moscow, 119991
A. Yu. Marchenkov
Moscow Power Engineering Institute (National Research University)
Email: fatig@mail.ru
Russian Federation, Moscow, 111250
V. P. Sirotinkin
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Russian Federation, Moscow, 119991
A. S. Baikin
Baikov Institute of Metallurgy and Materials Science
Email: fatig@mail.ru
Russian Federation, Moscow, 119991
G. S. Seval’nev
All-Russia Institute of Aviation Materials (VIAM)
Email: fatig@mail.ru
Russian Federation, Moscow, 105005
Supplementary files
