Email this article Technological process of field crops spraying with slotted sprayers
- Authors: Kireev I.M.1, Danilov M.V.2, Koval’ Z.M.1, Zimin F.A.1
-
Affiliations:
- Novokubansk Branch of Russian Scientific and Research Institute of Information and Feasibility Studies on Engineering Support of Agricultural Industry
- Stavropol State Agrarian University
- Issue: Vol 89, No 6 (2022)
- Pages: 395-401
- Section: New machines and equipment
- URL: https://journal-vniispk.ru/0321-4443/article/view/125946
- DOI: https://doi.org/10.17816/0321-4443-115022
- ID: 125946
Cite item
Full Text
Abstract
BACKGROUND: The subject of the study is the technological process of spraying field crops with slotted sprayers and the indicators dispersion.
AIMS: Improving the technological process of spraying plants with the use of pneumo-hydraulic slotted sprayers.
METHODS: Special equipment was used for photographing films of the liquid being sprayed under various operating modes of slotted sprayers with the possibility of calculating the size of the droplets. Fulfillment of the requirements for the number of drops/cm2 at the treated object, overlapping the liquid spray jets ensures uniform distribution of drops over the spraying width. Therefore, it was sufficient to have information about the fragmentation of the thickness of the liquid film along the axis of the nozzle spray liquid into drops and obtaining their quantity per unit time depending on the flow rate of the working fluid.
Newness of the research lies in determining the effective operation of slotted sprayers as part of the spraying device.
RESULTS: With the use of the special equipment, it is possible to fulfill agrotechnical requirements for droplet sizes. When using herbicides for foliar post-emergence treatment with a systemic pesticide, the limits of MMD range are from 226 µm to 400 µm. Soil herbicide treatment with a systemic pesticide requires an increased droplet MMD range of 401 µm to 500 µm and >500 µm. The number of drops/cm2 when using fungicides is limited from 50 to 70, insecticides – from 20 to 30, and herbicides – from 20 to 40.
CONCLUSIONS: The applied technology makes it possible to reduce the consumption of preparations and working fluid with high work performance and resource saving. The above research results can be used as the basis for determining the effective technology of a boom sprayer with slotted liquid sprayers. Fulfillment of the requirements for the number of drops/cm2 at the treatment facility overlapping liquid spray torches ensures a uniform distribution of drops over the spraying width. Therefore, it suffices to know about the division of the thickness of the liquid film along the axis of the liquid spray jet into drops and to obtain their number per unit time.
Full Text
##article.viewOnOriginalSite##About the authors
Ivan M. Kireev
Novokubansk Branch of Russian Scientific and Research Institute of Information and Feasibility Studies on Engineering Support of Agricultural Industry
Email: kireev.I.M@mail.ru
ORCID iD: 0000-0003-0723-4515
SPIN-code: 4348-1536
Dr. Sci. (Tech.), Leading Researcher, Head of the Laboratory of the Laboratory for Development of Test Equipment
Russian Federation, NovokubanskMikhail V. Danilov
Stavropol State Agrarian University
Email: danilomaster80@mail.ru
ORCID iD: 0000-0002-8369-3329
SPIN-code: 5193-0379
Cand. Sci. (Engin.), Head of the Processes and Machines in Agribusiness Department
Russian Federation, StavropolZinaida M. Koval’
Novokubansk Branch of Russian Scientific and Research Institute of Information and Feasibility Studies on Engineering Support of Agricultural Industry
Author for correspondence.
Email: zinakoval@mail.ru
ORCID iD: 0000-0002-5214-2110
SPIN-code: 1378-2953
Cand. Sci. (Tech.), Chief Scientist of the Laboratory for Development of Test Equipment
Russian Federation, NovokubanskFilipp A. Zimin
Novokubansk Branch of Russian Scientific and Research Institute of Information and Feasibility Studies on Engineering Support of Agricultural Industry
Email: philippza91@gmail.com
ORCID iD: 0000-0001-6655-3976
SPIN-code: 4290-8248
Engineer of the Laboratory for Development of Test Equipment
Russian Federation, NovokubanskReferences
- TeeJet Technologies [Electronic resource]. Technologies 50A-RU. Available from: http://teejet.it/russian/home/litera-ture/catalogs/catalog-51a-ru.aspx Accessed: 15.12.2022.
- Fedorenko VF, et al. Technical and technological requirements for promising agricultural machinery. Moscow: Rosinformagrotekh, 2011. 248 p. (In Russ).
- GOST 12.2.019-2015. Interstate standard. Agricultural machinery. Machinery for crop protection. Spraying equipment. Test methods. (In Russ). Available from: https://docs.cntd.ru/document/1200174759 Accessed: 15.12.2022.
- Patent RUS No. RU 73162 U1 / Byul. No. 14. Kireev IM, Koval ZM. Device for photographing and measuring the angles of the torch of the sprayed liquid. (In Russ). Available from: https://yandex.ru/patents/doc/RU73162U1_20080520 Accessed: 15.12.2022.
- Pages DG, Galustov VS. Fundamentals of the technique of spraying liquids. Moscow: Khimiya; 1984. 256 p. (Series: “Processes and devices of chemical and petrochemical technology”). (In Russ).
- Dityakin YuF, Klyachko LA, Novikov BV, Yagodkin VI. Spraying of liquids. 2nd revised and updated. Moscow: Mashinostroenie; 1977. 207 p. (In Russ).
- Dunsky VF, Nikitin NV. Monodisperse spraying of liquids by rotating sprayers. In: Aerosols in agriculture: scientific works. Ed. by Yu.N. Fadeev. Moscow: Kolos; 1973. Р. 71–106. (In Russ).
- Kireev IM, Koval ZM. Determination of the main criterion for agrotechnical evaluation of sprayers. In: Agroengineering science in the field of agriculture: innovations, achievements. Collection of scientific papers of the VII International Scientific and Practical Conference, April 11–12. Zernograd; 2012. Р. 115–121. (In Russ).
- Kireev IM, Koval ZM. A device for evaluating the quality of slot sprayers. Tractors and agricultural machinery. 2011;(3):16–18. (In Russ).
- Koval ZM. Characteristics of dispersion of slot atomizers of some manufacturers when modeling their functioning on bench equipment. Educatio. 2016;(6):15–21. (In Russ).
Supplementary files
