Results of calculation of changing the pollution concentration and alkalinity of the gas engine oils
- Authors: Utaev S.A.1
-
Affiliations:
- Karshi State University
- Issue: Vol 90, No 3 (2023)
- Pages: 265-272
- Section: Quality, reliability
- URL: https://journal-vniispk.ru/0321-4443/article/view/254658
- DOI: https://doi.org/10.17816/0321-4443-321243
- ID: 254658
Cite item
Full Text
Abstract
BACKGROUND: The issue of ensuring the reliability of internal combustion engines is a relevant composite task, solved in various directions. The important ones among them are the operation conditions, the type of fuel used, control of the motor oils condition, as well as justification of the service life of the latter. When ensuring the operational properties of engine oils of the diesel–based gas engines, the control of the main indicators of the operating oil is relevant.
AIMS: Assessment of changes in the pollution load and alkalinity of the M10G2 oils of the diesel–based gas engines. Application of equations for the theoretical analysis of changes in the pollution concentration and decrease of alkalinity, as well as for building dependencies of oil indicators.
METHODS: During the operation of internal combustion engines, thermochemical processes are actively developing in oils, leading to decrease in their quality due to the activation of additives and the accumulation of transformation products in oils. Mechanical impurities accumulate in the engine oil as a result of dust ingress with the sucked air or through leaks in the crankcase space, as well as due to the formation of insoluble oxidation products and wear of parts of the cylinder-piston group. The base number is a conditional measure of the oil’s ability to neutralize acids formed from the products of fuel combustion and oxidation of the oil base. The alkalinity specified by the presence of alkaline additives is consumed for the neutralization of acids at different rates.
RESULTS: The process of oil aging in internal combustion engines and factors affecting the aging of engine oil are considered. Analytical equations are used to calculate changes in the pollution concentration and changes in the alkalinity of the diesel-based gas engine oil, graphical dependences of oil indicators on the service duration are given.
CONCLUSIONS: The practical value of the study lies in the fact that, using the analytical equations, the value of changes in individual properties of diesel-based gas engine oils is analyzed. Operation of the engine with the oil which base number is below the limit leads to a decrease in engine reliability, accelerated wear of individual parts, lacquer formation and sludging on piston rings and cylinders. It is not allowed to use oils with the base number below 2 mg of KOH/g.
Keywords
Full Text
##article.viewOnOriginalSite##About the authors
Sobir A. Utaev
Karshi State University
Author for correspondence.
Email: utaev.s@list.ru
ORCID iD: 0000-0003-0377-8929
Cand. Sci. (Tech.), Associate Professor of the Alternative and Renewable Energy Sources Department
Uzbekistan, 17 Kuchabog street, 180103 KarshiReferences
- Altshuler MA, Vipper AB, Zhurba AS. Kinetic study and prediction of the response of alkaline properties of motor oils. Khimiya i tekhnologiya topliv i masel. 1980;10:27–29. (In Russ).
- Arabyan SG, Vipper AB, Kholomonov IA. Oils and additives for tractor and combine engines. Moscow: Mashinostroenie; 1984. (In Russ).
- Venzel SV. The use of fuels and lubricating oils in automobile and tractor engines. Moscow: Mashinostroenie, 1985. (In Russ).
- Bekbolatov GZh, Shingisbayeva ZA, Tulenov A, et al. Determination of environmental consequences from production processes of motor transport enterprises. Eurasia J. Biosci. 2019;13:167–176.
- Bazarov BI, Magdiev KI, Sidikov FSh, et al. Current trends in the use of alternative motor fuels. JARITS. 2019;2(14):186–188. doi: 10.26160/2474-5901-2019-14-186-189
- Grigoriev MA. Engine oil quality and parts reliability. Moscow: Mashinostroenie; 1981. (In Russ).
- Morozov GA, Artsiomov OM. Diesel oil cleaning. Leningrad: Mashinostroenie; 1971. (In Russ).
- Musurmanov RK, Utaev SA. Mathematical modeling of changes in the physical and chemical properties of gas engine oils. IOP Conf. Ser.: Earth Environ. Sci. 2021;868:012044. doi: 10.1088/1755-1315/868/1/012044
- Musurmanov RK, Utaev SA. Ecological impact and results of the study of motor oils of internal combustion engines by conducting tribomechanical stabilizers. IOP Conf. Ser.: Earth Environ. Sci. 2022;1112:012146. doi: 10.1088/1755-1315/1112/1/012146
- Ostrikov VV, Ukhanov AP, Kleimenov OA, et al. Fuel, lubricants and technical liquids. Ulyanovsk: UGSKhA; 2009. (In Russ).
- Popov SYu. Povyshenie ekspluatatsionnykh svoystv remontno- vosstanovitelnykh sostavov pri ikh ispolzovanii v dvigatelyakh vnutrennego sgoraniya [dissertation] Tambov; 2014. (In Russ).
- Utaev SA. Investigation of the operation and continuous introduction of additives to gas engine oils. Sovremennye materialy, tekhnika i tekhnologii nauchno-prakticheskiy retsenziruemyy zhurnal. 2018. № 3(18). C. 55–60. (In Russ).
- Utaev SA. The results of the analysis of the continuous input of additives in the lubricating system of the engine operating on gaseous fuel. Tractors and Agricultural Machinery. 2019;86(3): 76–80. (In Russ). doi: 10.31992/0321-4443-2019-3-76-80
- Chudinovskikh AL. Razrabotka nauchnykh osnov khimmotologicheskoy otsenki avtomobilnykh motornykh masel [dissertation] Moscow, 2016:14–35. (In Russ).
Supplementary files
