Study of the continuous mode of mixing feed components in a mixing plant

Cover Page

Cite item

Full Text

Abstract

The article discusses the problem of developing means that can increase the efficiency of mechanization of the process of preparing liquid feed in animal husbandry. Design bureaus, research and technological institutes for mechanization and electrification of agriculture have developed new progressive technologies, as well as kits, units, machines and apparatus for animal husbandry and fodder production. On the basis of this technique, complex mechanization of farms is being introduced and livestock complexes with industrial production technology are being created. But recently, the widespread use of domestic machines for the preparation of liquid feed mixtures has not been presented. Therefore, an experimental setup is proposed that combines three functions: a batcher, a pump and a mixer, which ultimately allows to obtain a mixture of good quality.

The article provides a program and research methodology for the installation. For this, a special stand has been developed, which makes it possible to determine the parameters of the mixture quality and the specific consumption of electrical energy. As a search for the optimal combination of factors for the optimization criteria: the degree of homogeneity and the specific consumption of electrical energy, plan 32 was chosen. Experimental studies have shown the range of supply of the installation at different speeds of rotation of the impeller shaft. Mixing studies have confirmed the effectiveness of the design of the plant and its components: dispenser, pump and mixer. With the help of experimental planning methods, the main factors influencing the mixing process are identified, and the optimal parameters of the mixture quality are determined. According to the studies carried out on the continuous introduction of components in an experimental installation for the preparation of liquid feed mixtures, we obtained that the optimal combinations of factors would be the water temperature t = 26...38 °C and the rotation frequency n = 1500...1650 min–1, while the degree of homogeneity reaches Θ = 94,6 % and unit costs of electric energy Eel = 0,198 kWh/t.u. st.un.

About the authors

P. N. Solonshchikov

FGBOU VO Vyatskiy GATU

Author for correspondence.
Email: solon-pavel@yandex.ru

PhD in Engineering

Russian Federation, Kirov

References

  1. Bulatov S.YU. Razrabotka i sovershenstvovaniye tekhnologicheskikh liniy i tekhnicheskikh sredstv prigotovleniya kormov v usloviyakh malykh form khozyaystvovaniya: dis. … dokt. tekhn. nauk [Development and improvement of technological lines and technical means for the preparation of feed in the conditions of small-scale farming: Dissetration for Degree of DSc in Engineering]. Knyaginino, 2018. 412 p.
  2. Mokhnatkin V.G., Shulyat’yev V.N., Filinkov A.S. i dr. Overview of devices and installations for the preparation of full milk substitutes and analysis of their effectiveness. Uluchsheniye ekspluatatsionnykh pokazateley sel’skokhozyaystvennoy energetiki. Materialy V Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Nauka – Tekhnologiya – ResursosberezheniYE», posvyashchеnnoy 60-letiyu inzhenernogo fakul’teta: Sbornik nauchnykh trudov [Improving the performance indicators of agricultural energy. Materials of the V International Scientific and Practical Conference “Science – Technology – Resource Saving”, dedicated to the 60th anniversary of the Faculty of Engineering: Collection of scientific papers]. Kirov: FGBOU VPO Vyatskaya GSKHA, 2012. Vyp. 13, pp. 101–105 (in Russ.).
  3. Patent No 146974 Rossiyskaya Federatsiya, MPK 29C9/00, A01J11/16, V01F7/02. Ustanovka dlya prigotovleniya smesey [Installation for the preparation of mixtures]: No 2014121853/10: zayavl: 29.05.2014: opubl. 20.10.2014 / V.G. Mokhnatkin, V.N. Shulyat’yev, A.S. Filinkov, P.N. Solonshchikov i dr.; zayavitel’ FGBOU VPO Vyatskaya GSKHA. 2 p.
  4. Mokhnatkin V.G., Filinkov A.S., Solonshchikov P.N. Multipurpose pumps for mixing intensification. Sel’skiy mekhanizator, 2013. No 8, pp. 25.
  5. Patent na poleznuyu model’ 104022 RF, MPK A23C11/00. Ustroystvo dlya prigotovleniya smesey [Mixing device] / V.G. Mokhnatkin, V.N. Shulyat’yev, A.S. Filinkov, i dr. No 2010152132/10; Zayavleno 20.12.2010. Byul. 2011. No 13.
  6. Mokhnatkin V.G., Shulyat’yev V.N., Filinkov A.S. i dr. Program and methodology for testing the device for introducing and mixing powder components with liquid. Uluchsheniye ekspluatatsionnykh pokazateley sel’skokhozyaystvennoy energetiki. Materialy V Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Nauka – Tekhnologiya – ResursosberezheniYE», posvyashchеnnoy 60-letiyu inzhenernogo fakul’teta: Sbornik nauchnykh trudov [Improving the performance indicators of agricultural energy. Materials of the V International Scientific and Practical Conference “Science – Technology – Resource Saving”, dedicated to the 60th anniversary of the Faculty of Engineering: Collection of scientific papers]. Kirov: FGBOU VPO Vyatskaya GSKHA, 2012. Vyp. 13, pp. 96–100 (in Russ.).
  7. Aleshkin V.R. Statistical assessment of the quality of mixing feed. Sb. nauch. tr. Perm. s.-kh. in-t. Perm’, 1983, pp. 3−9 (in Russ.).
  8. Filinkov A.S., Solonshchikov P.N., Oblasov A.N. i dr. A device for mixing components with a liquid for the preparation of culture media. Vestnik Saratovskogo gosagrouniversiteta im. N.I. Vavilova. 2013. No 9, pp. 50−53 (in Russ.).
  9. Obolenskiy N.V., Bulatov S.YU., Svistunov A.I. Investigation of the process of mixing feed components. Vestnik nauchnykh konferentsiy. 2015. No 1–1 (1), pp. 111−117 (in Russ.).
  10. Andreyev V.L. Ispol’zovaniye statisticheskogo paketa Statgraphics Plus 5.1 dlya obrabotki rezul’tatov eksperimental’nykh issledovaniy [Using the statistical package Statgraphics Plus 5.1 for processing the results of experimental studies]: Metodicheskoye posobiye. Kirov: FGBOU VPO Vyatskaya GSKHA Publ., 2012. 32 p.
  11. Aleshkin V.R., Filinkov A.S. Osnovy nauchnykh issledovaniy: tetrad’ dlya laboratornykh rabot [Fundamentals of research: workbook for laborotary works]. Izd. 3-e pererabot. i dop. Kirov: Vyatskaya GSKHA Publ., 2010. 45 p.

Supplementary files

Supplementary Files
Action
1. JATS XML
2. Fig. 1. Scheme of an experimental setup for the preparation of liquid feed mixtures

Download (77KB)
3. Fig. 2. Scheme of the setup with an open circuit: 1 – setup; 2 – water tank; 3 – ready-mix tank; 4 – DMK-20 multimeter; 5 – frequency converter; 6 – component loading valve; 7 – loading chamber; 8, 9, 10, 11 – ball valves

Download (225KB)
4. Fig. 3. Two-dimensional sections of the response surface for the degree of homogeneity Θ, % (а) and specific energy consumption of electrical energy Eel, kW·h /t.d. h. (b) depending on the frequency of rotation of the impeller n, min-1 and water temperature t, °С

Download (187KB)

Copyright (c) 2021 Solonshchikov P.N.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
 


Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».