Chemical Silvering of Ceramic Dielectrics Based on Aluminum Oxide
- Authors: Speshilov I.O.1, Vartanyan M.A.1, Makarov N.A.1, Grunskii V.N.1, Abrashov A.A.1, Vagramyan T.A.1
-
Affiliations:
- D. I. Mendeleev Russian Chemical Technology University
- Issue: Vol 72, No 11-12 (2016)
- Pages: 451-453
- Section: Coatings and Enamels
- URL: https://journal-vniispk.ru/0361-7610/article/view/244578
- DOI: https://doi.org/10.1007/s10717-016-9809-8
- ID: 244578
Cite item
Abstract
The effect of the fabrication parameters of ceramic on the structure and adhesion of a chemical coating is studied. A relation is found between the sintering temperature of ceramic samples and the quality of the subsequent chemical coating with silver. It is shown that high-quality coatings are obtained in a narrow temperature range.
About the authors
I. O. Speshilov
D. I. Mendeleev Russian Chemical Technology University
Author for correspondence.
Email: vanya-speshilov@ya.ru
Russian Federation, Moscow
M. A. Vartanyan
D. I. Mendeleev Russian Chemical Technology University
Email: vanya-speshilov@ya.ru
Russian Federation, Moscow
N. A. Makarov
D. I. Mendeleev Russian Chemical Technology University
Email: vanya-speshilov@ya.ru
Russian Federation, Moscow
V. N. Grunskii
D. I. Mendeleev Russian Chemical Technology University
Email: vanya-speshilov@ya.ru
Russian Federation, Moscow
A. A. Abrashov
D. I. Mendeleev Russian Chemical Technology University
Email: vanya-speshilov@ya.ru
Russian Federation, Moscow
T. A. Vagramyan
D. I. Mendeleev Russian Chemical Technology University
Email: vanya-speshilov@ya.ru
Russian Federation, Moscow
Supplementary files
