Email this article Effect of the Colloidal Content in Slip Based on Quartz Glass
- Authors: Kharitonov D.V.1,2, Anashkina A.A.1,2, Motornova M.S.1,2, Lemeshev D.O.2
-
Affiliations:
- A. G. Romashin Obninsk Scientific and Industrial Enterprise Tekhnologiya JSC
- D. I. Mendeleev Russian University of Chemical Technology
- Issue: Vol 76, No 5-6 (2019)
- Pages: 174-177
- Section: Science for Ceramic Production
- URL: https://journal-vniispk.ru/0361-7610/article/view/245214
- DOI: https://doi.org/10.1007/s10717-019-00159-6
- ID: 245214
Cite item
Open Access
Access granted
Subscription Access
Abstract
The formation of very fine SiO2 particles during milling of quartz glass in the fabrication of ceramic parts was investigated. A method for determining the quantitative content of very fine silica in slip based on quartz glass was developed and tested. The concentration of very fine SiO2 particles in different batches of slip was determined. The influence of the content of the colloidal component in slurry on the sintering of ceramic material was evaluated.
About the authors
D. V. Kharitonov
A. G. Romashin Obninsk Scientific and Industrial Enterprise Tekhnologiya JSC; D. I. Mendeleev Russian University of Chemical Technology
Author for correspondence.
Email: info@technologiya.ru
Russian Federation, Obninsk; Moscow
A. A. Anashkina
A. G. Romashin Obninsk Scientific and Industrial Enterprise Tekhnologiya JSC; D. I. Mendeleev Russian University of Chemical Technology
Email: info@technologiya.ru
Russian Federation, Obninsk; Moscow
M. S. Motornova
A. G. Romashin Obninsk Scientific and Industrial Enterprise Tekhnologiya JSC; D. I. Mendeleev Russian University of Chemical Technology
Email: info@technologiya.ru
Russian Federation, Obninsk; Moscow
D. O. Lemeshev
D. I. Mendeleev Russian University of Chemical Technology
Email: info@technologiya.ru
Russian Federation, Moscow
Supplementary files
