Determination of the natural oscillation frequencies of self aligning wheels of an adaptive gear drives with arched teeth
- Autores: Piven V.V.1, Trubkin D.A.1
-
Afiliações:
- Industrial University of Tyumen
- Edição: Nº 4 (2025)
- Páginas: 78-86
- Seção: DRILLING OF WELLS AND FIELDS DEVELOPMENT
- URL: https://journal-vniispk.ru/0445-0108/article/view/335038
- DOI: https://doi.org/10.31660/0445-0108-2025-4-78-86
- EDN: https://elibrary.ru/OTOCJQ
- ID: 335038
Citar
Resumo
Gears drives are the primary means of transmitting torque in most modern machines. To enhance the performance of these machines, it is essential to improve the load-bearing characteristics of gear drives. One of the promising approaches is the use of cylindrical gears with arched teeth. These gears eliminate axial forces, ensure smooth meshing, and provide higher bending strength compared to straight-tooth gears. When compared to spur and helical gears, curved-tooth gears offer increased durability, reduced vibration, and lower noise levels. However, they require precise installation. Shaft misalignment due to assembly errors, wear, or thermal deformation can negatively affect performance. They demand precise installation. Shaft misalignment resulting from assembly errors, wear, or thermal deformation can adversely affect performance characteristics. The aim of this study is to establish mathematical relationships for calculating the natural frequencies of self-aligning wheels in an adaptive gear drive. The authors of the paper used analytical mechanics methods. They did calculations for a gear system with arched teeth and self-aligning half-wheels operating in parallel. The result is a set of mathematical expressions for determining natural frequencies based on the stiff-ness of elastic elements and the mass properties of the meshing gear and half-wheels.
Palavras-chave
Sobre autores
V. Piven
Industrial University of Tyumen
Email: pivenvv@yandex.ru
D. Trubkin
Industrial University of Tyumen
Autor responsável pela correspondência
Email: pivenvv@yandex.ru
Bibliografia
- Сызранцев, В. Н. Синтез адаптивной цилиндрической передачи с арочными зубьями с двумя зонами контакта / В. Н. Сызранцев, А. И. Стариков. doi: 10.25206/1813-8225-2023-188-38-45. Текст : непосредственный // Омский научный вестник. - 2023. - № 4 (188). - С. 38-45.
- Паршин, А. Н. Изготовление цилиндрических колес с арочными зубьями резцовыми головками на станках с ЧПУ и опыт их внедрения / А. Н. Паршин. Текст : непосредственный // Теория и практика зубчатых передач: сб. тр. междунар. симп. ; под ред. В. И. Гольдфарба. Ижевск : Изд во Ижевского государственного технического университета им. М. Т. Калашникова. - 2014.- С. 151-159.
- Fuentes Aznar, A. Comparison of spur, helical and curvilinear gear drives by means of stress and tooth contact analyses / A. Fuentes Aznar, R. Ruiz Orzaez, I. Gonzalez Perez. Text : direct // Meccanica. - 2017. - Vol. 52. - P. 1721-1738.
- Сызранцев, В. Н. Цилиндрические зубчатые передачи с арочными зубьями: геометрия, прочность, надежность: монография / В. Н. Сызранцев, К. В. Сызранцева. Тюмень : Тюменский индустриальный университет, 2021. - 170 с. Текст : непосредственный.
- Syzrantsev V. N. Cylindrical arc gears: History, Achievements, and Problems // Gears in Design, Production and Education: A Tribute to Prof. Veniamin Gold-farb. Cham : Springer International Publishing, - 2021. - P. 131-151. Text : direct.
- Плахтин, В. Д. Анализ зацепления цилиндрических колес с арочными зубьями / В. Д. Плахтин, А. П. Давыдов, А. Н. Паршин. Текст : непосредственный // Вестник машиностроения. - 2006. - № 11. - С. 3-7.
- Плахтин, В. Д., Паршин, А. Н. Синтез зацепления цилиндрических зубчатых колес с арочными бочкообразными зубьями / В. Д. Плахтин, А. Н. Паршин. Текст : непосредственный // Технология машиностроения. - 2007. - № 2. - С. 46-53.
- Плахтин, В. Д. Синтез цилиндрических зубчатых передач с арочными бочкообразными зубьями / В. Д. Плахтин, А. Н. Паршин. Текст : непосредственный // Тез. докл. международ, конф. по теории механизмов и механике машин, Краснодар. - 2006. - С. 79-80.
- Патент на изобретение № 2721579 Российская Федерация, МПК F 16 H1/06. Адаптивная цилиндрическая передача с арочными зубьями : № 2019136799; заявл. 15.11.2019; опубл. 20.05.2020 / Сызранцев В. Н., Сызранцева К. В., Вибе В. П., Денисов Ю. Г.: патентообладатель Общество с ограниченной ответственностью Фирма «СТЭК» (RU). Текст : непосредственный.
Arquivos suplementares
