Email this article Get 172–2016, State Primary Standard of Unit of Surface Density of Thermal Flux
- Authors: Rybak N.I.1, Cherepanov V.Y.1, Sheinin E.M.1, Yamshanov V.A.1
-
Affiliations:
- Siberian State Research Institute of Metrology (SNIIM)
- Issue: Vol 61, No 3 (2018)
- Pages: 193-198
- Section: State Standards
- URL: https://journal-vniispk.ru/0543-1972/article/view/246412
- DOI: https://doi.org/10.1007/s11018-018-1408-3
- ID: 246412
Cite item
Open Access
Access granted
Subscription Access
Abstract
The composition of the State Primary Standard of the unit of surface heat flux density, GET 172–2016, its metrological characteristics, and operating principle are presented.
About the authors
N. I. Rybak
Siberian State Research Institute of Metrology (SNIIM)
Author for correspondence.
Email: tphys@sniim.ru
Russian Federation, Novosibirsk
V. Ya. Cherepanov
Siberian State Research Institute of Metrology (SNIIM)
Email: tphys@sniim.ru
Russian Federation, Novosibirsk
E. M. Sheinin
Siberian State Research Institute of Metrology (SNIIM)
Email: tphys@sniim.ru
Russian Federation, Novosibirsk
V. A. Yamshanov
Siberian State Research Institute of Metrology (SNIIM)
Email: tphys@sniim.ru
Russian Federation, Novosibirsk
Supplementary files
