Indirect Method of Measuring the Impulse Pressure Created by a Pendulum-Type Installation
- Authors: Nedbailo A.A.1, Patokin E.V.1, Gordeev A.A.1
-
Affiliations:
- Russian Federal Nuclear Center – Zababakhin All-Russia Research Institute of Technical Physics (RFYaTs – VNIITF)
- Issue: Vol 61, No 3 (2018)
- Pages: 258-264
- Section: Mechanical Measurements
- URL: https://journal-vniispk.ru/0543-1972/article/view/246431
- DOI: https://doi.org/10.1007/s11018-018-1418-1
- ID: 246431
Cite item
Abstract
An indirect method of measuring the pulse pressure created on a pendulum-type installation is developed, without using a reference sensor. The basic technical characteristics of the installation are regulated. The possibility and expediency of using the developed measurement method are theoretically substantiated and experimentally confirmed.
About the authors
A. A. Nedbailo
Russian Federal Nuclear Center – Zababakhin All-Russia Research Institute of Technical Physics (RFYaTs – VNIITF)
Email: omit@vniitf.ru
Russian Federation, Snezhinsk
E. V. Patokin
Russian Federal Nuclear Center – Zababakhin All-Russia Research Institute of Technical Physics (RFYaTs – VNIITF)
Author for correspondence.
Email: omit@vniitf.ru
Russian Federation, Snezhinsk
A. A. Gordeev
Russian Federal Nuclear Center – Zababakhin All-Russia Research Institute of Technical Physics (RFYaTs – VNIITF)
Email: omit@vniitf.ru
Russian Federation, Snezhinsk
Supplementary files
