Reducing the edge deformation of thin electrical steel sheet
- Авторы: Loginov Y.N.1, Puzanov M.P.1, Uritskii A.G.2
- 
							Учреждения: 
							- Yeltsin Ural Federal University
- OOO VIZ-Stal’
 
- Выпуск: Том 47, № 4 (2017)
- Страницы: 267-273
- Раздел: Article
- URL: https://journal-vniispk.ru/0967-0912/article/view/179532
- DOI: https://doi.org/10.3103/S0967091217040076
- ID: 179532
Цитировать
Аннотация
The edge deformation of cold-rolled electrical-steel sheet in finishing is studied, as well as the change in flatness of the sheet in rolling and heat treatment. The influence of these processes on the edge deformation is determined. The edge deformation is largely due to thermal deformation occurring when coils of strip are heated in cupola furnaces. Quantitative analysis indicates that the thermal deformation is due to the temperature gradients in the coils. Cold-rolling conditions that minimize edge deformation are proposed and tested.
Об авторах
Yu. Loginov
Yeltsin Ural Federal University
							Автор, ответственный за переписку.
							Email: j.n.loginov@urfu.ru
				                					                																			                												                	Россия, 							Yekaterinburg						
M. Puzanov
Yeltsin Ural Federal University
														Email: j.n.loginov@urfu.ru
				                					                																			                												                	Россия, 							Yekaterinburg						
A. Uritskii
OOO VIZ-Stal’
														Email: j.n.loginov@urfu.ru
				                					                																			                												                	Россия, 							Yekaterinburg						
Дополнительные файлы
 
				
			 
						 
					 
						 
						 
						 
									 
  
  
  
  
  Отправить статью по E-mail
			Отправить статью по E-mail  Открытый доступ
		                                Открытый доступ Доступ предоставлен
						Доступ предоставлен Только для подписчиков
		                                		                                        Только для подписчиков
		                                					